Agilent Technologies 7500 ICP-MS Operator's Manual page 33

Agilent 7500 ICP-MS ChemStation Operator's Manual
Using the Agilent 7500 ICP-MS ChemStation Software
The ICP-MS Top icon starts the software and allows
you to access ChemStation functions pertaining to the
instrument, data acquisition, and data analysis. It also
enables you to create and run methods and sequences.
This manual contains information about these
ChemStation functions.
The Offline Data Analysis icon starts the offline
analysis function. With this function, you can
manipulate data that has already been acquired, while
at the same time acquiring new data. For information
about this function, see Chapter 9 through 15.
The Offline Edit Sample Log Table icon allows you to
edit the sample log table offline. It can be used while a
sequence or method is running. For more information
about this function, see Chapter 6, "Set Up a
Sequence" and the appropriate sections of the
Intelligent Sequence Manual.
The Configuration icon provides access to software
configuration and remote access. For more
information about configuration, see Chapter 2,
"Configuration".
The ICP-MS DataBase icon opens the ICP-MS
DataBase, which provides element, AMU, and
interference information. For more information about
the ICP-MS DataBase, see Chapter 5, "Creating a
Method".
The DataBase Editor icon opens "Select database"
dialog box, which allows the creation and editing of
the above ICP-MS database. For more information
about the DataBase Editor, see Chapter 17, "Editing
the Database"
1-3