Windows Xp Configuration - Agilent Technologies 7500 ICP-MS Operator's Manual

1 Turn on the computer and check the following BIOS settings.
N O T E
N O T E
Agilent 7500 ICP-MS ChemStation Operator's Manual
Installing the Agilent 7500 ChemStation Software (Windows XP)

Windows XP Configuration

• Power setting: Disabled (for example: Auto Suspend Timeout, Hard Drive
• Plug and Play: Enable
All items will not always appear.
Refer to the computer's manual for the BIOS setting.
Following is a typical example.
Select F2 (F8 for VL420, F10 for Evo D510) during computer initialization, check
that the following settings are true. BIOS settings need not be changed for the D530.
Table 18-1 BIOS Settings for Vectra VL400
Items
Power >> Auto Suspend Timeout
Power >> Modem Ring
Advanced > Plug & Play O/S
Table 18-2 BIOS Settings for Vectra VL420
Items
Main >> PnP OS
Table 18-3 BIOS Settings for Evo D510
Items
Power >> Hard Drive Timeout
Power >> System Timeout
Exit and save the settings.
Timeout, Modem Ring)
Setting
Disabled
Disabled
Yes
Setting
YES
Setting
Never
Never
18-3