Running A Sample By Using A Chained Sequence; Loading A Chained Sequence - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Running a Sample Analysis

Running a Sample by Using a Chained Sequence

A chained sequence is designed to allow you to run a series of sequences. To run
samples using a chained sequence, you must first load the chained sequence and
then run it.

Loading a Chained Sequence

To load an existing sequence, complete the following steps from the Top window:
1 Select Chained Sequence>>Load.
The Load Chained Sequence dialog box appears.
Load Chained Sequence Dialog Box
2 Use one of the following methods to choose the file name:
• Click a file name in the displayed list and click OK.
• Double-click a file name in the displayed list.
• Type the Name and click OK.
8-8