Agilent Technologies 7500 ICP-MS Operator's Manual page 3

Warranty
The information contained in this
document is subject to change without
notice.
Agilent Technologies makes no
warranty of any kind with regard to
this material including, but not limited
to, the implied warranties of
merchantability and fitness for a
particular purpose.
Agilent Technologies shall not be liable
for errors contained herein or for
incidental or consequential damages in
connection with the furnishing,
performance or use of this material.
Agilent Technologies assumes no
responsibility for the use or reliability of
its software on equipment that is not
furnished by Agilent Technologies.
Agilent Technologies warrants its
Analytical products against defects in
materials and workmanship for the
warranty period. During the warranty
period Agilent Technologies will, at its
option, repair or replace products which
prove to be defective. Products that are
installed by Agilent Technologies are
warranted from the installation date and
all others from the date of delivery.
If the Buyer schedules or delays
installation more than 30 days after
delivery, then the warranty period starts
on 31st day from the date of shipment.
For international orders, the grace period
is 60 days and the warranty period starts
on the 61st day from the date of
shipment.
Agilent Technologies software and
firmware products which are designated
by Agilent Technologies for use with
hardware products, when properly
Yokogawa Analytical Systems Inc.
9-1 Takakura-Cho, Hachioji-shi
Tokyo 192-0033
Japan
installed on those hardware products,
are warranted not to fail to execute their
programming instructions due to defects
in materials and workmanship. If
Agilent Technologies receives notice of
such defects during the warranty period,
Agilent Technologies shall repair or
replace software media and firmware
which do not execute their
programming instructions due to such
defects. Agilent Technologies does not
warrant that the operation of the
software, firmware or hardware shall be
uninterrupted or error free.
Within Agilent Technologies service
travel areas, warranty and installation
services for products installed by
Agilent Technologies and certain other
products designated by Agilent
Technologies will be performed at the
Customer's facility at no charge. For
installation and warranty services
outside of Agilent Technologies' service
travel area, Agilent Technologies will
provide a quotation.
The foregoing warranty shall not apply
to defects resulting from:
1.Improper or inadequate maintenance,
adjustment, calibration or operation
by the Customer.
2.Customer-supplied software,
hardware, interfacing or consumables.
3.Unauthorized modifications or
misuse.
4.Operation outside of the
environmental and electrical
specifications for the product.
5.Improper site preparation and
maintenance.
6.Customer-induced contamination or
leaks.
This warranty may be modified in
accordance with the laws of your
country. Please consult your local
Agilent Technologies office for the
period of the warranty, for shipping
instructions and for the applicable
wording of the local warranty.
Warranty Claims
If physical damage is found, or if
operation is not as specified when the
instrument is first received, notify the
carrier and the nearest Agilent
Technologies office immediately. The
Agilent Technologies office will
arrange for repair or replacement of the
instrument without waiting for
settlement of a claim with the carrier.
For other than initial inspection
warranty claims, contact your local
Agilent Technologies office.
Service Agreements
Several service agreements are
available, each designed to meet a
specific need. In addition to a
preventive maintenance agreement,
others cover specific
repair/maintenance services for the
analytical products and can provide for
the extension of warranty beyond the
initial warranty period.
Details of these agreements, together
with prices applicable to the particular
installation, can be obtained from your
local Agilent Technologies office.
Export License
If, after installation in a country, the
instrument is exported to another
country, an export license must be
obtained. For full infromation, please
call your local Agilent Technologies
representative.