Agilent Technologies 7500 ICP-MS Operator's Manual page 269

N O T E
1 Click the QC Report box and click OK.
2 To produce a batch file of the report, select the check box Copy saved Text
3 Click OK.
4 Select either Print Only or Recalculate then Print for QC Report, and click OK.
Agilent 7500 ICP-MS ChemStation Operator's Manual
Creating a Method
To generate a QC Report, complete the following steps:
If your QC configuration does not include any QC parameters, the QC Report section
will be grayed out.
Reports to 'Reports' folder.
If the setting to save reports as a file is selected as described in step 4, the same
information will be saved in a file named "qc_FILE NAME.tex" in the Reports
directory.
This setting is used to allow an external applications to obtain reports periodically.
The QC Report Options dialog box appears.
QC Report Option Dialog Box
For more information about the QC report, refer to the appropriate sections of the
Intelligent Sequence Manual.
After setting all selected report options, the screen goes on to Edit Analysis
Parameters, explained later in this chapter.
5-77