Loading The Default Method - Agilent Technologies 1290 Infinity LC System System Manual And Quick Reference

5
Quick Start Guide
Preparing the system

Loading the Default Method

The ChemStation has a default method named DEF_LC.M which is loaded at
first execution or whenever a new blank method template is required. It
contains default settings for all modules.
With this procedure, you load the method DEF_LC.M. You can use it to set all
parameters to default settings, or to get a blank method template before
setting up a new method.
1 Go to Method and Run Control view of the ChemStation.
2 On the menu bar, select Method > New Method..., and select DEF_LC.M from
The default method (DEF_LC.M) has a set of default parameters which can then
be modified to create a new method. For instance, the flow rate is set to zero,
and the Method Information and Method History are blank.
Note that this method can never be overwritten with new parameters. Hence clicking on
N O T E
Save will re-direct you into the Save As... function, so that you must enter a different
method name.
92
the context menu.
Alternatively, you can use the Load Method icon
double-click the method name DEF_LC.M in the Methods tab of the Navigation
Pane.
Agilent 1290 Infinity LC System Manual and Quick Reference
under the menu bar, or