PW6K1R1E Wiring and Setup
Jumper Configuration
2.3 Jumper Configuration
Figure 2-3: J5 Jumper Location
J5 Jumper hidden under TB5
Table 2: Jumper Settings
Jumper
J1
J2
J3
J4
J5
J6
J7
2.4 DIP Switch Configuration
All S1 switch settings are unassigned and are reserved for future use. Set all switches
to the OFF position.
2.5 Input Power
The PW6K1R1E is powered by one of the following two ways (jumper selected):
1. The Ethernet connection using PoE, fully compliant to IEEE 802.3af.
2. Local 12VDC power supply, TB5-3 (VIN), TB5-4 (GND).
8
www.honeywell.com
Set at
N/A
Factory Use Only
N/A
Factory Use Only
N/A
Factory Use Only
N/A
Factory Use Only
PoE
PW6K1R1E powered from the Ethernet connection
12V
PW6K1R1E powered from an external 12VDC power source
connected to TB5-3 (VIN), TB5-4 (GND)
N/A
Ethernet connection with PoE support
N/A
Factory Use Only
Description