Settings - ABB REL650 series Technical Manual

1MRK 506 335-UUS A
14.17.5
Table 508: SSIML (71) Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
LevelAlmLimit 0.00 - 25.00
LevelLOLimit 0.00 - 25.00
TempAlarmLimit -40.00 - 200.00
TempLOLimit -40.00 - 200.00
tLevelAlarm 0.000 - 60.000
tLevelLockOut 0.000 - 60.000
tTempAlarm 0.000 - 60.000
tTempLockOut 0.000 - 60.000
tResetLevelAlm 0.000 - 60.000
Table continues on next page
Technical manual
Table 506: SSIML (71) Input signals
Name Type
BLOCK BOOLEAN
BLK_ALM BOOLEAN
LEVEL REAL
TEMP REAL
LVL_ALM BOOLEAN
LEVEL_LO BOOLEAN
SET_L_LO BOOLEAN
SET_T_LO BOOLEAN
RESET_LO BOOLEAN
Table 507: SSIML (71) Output signals
Name Type
LEVEL REAL
LVL_ALM BOOLEAN
LVL_LO BOOLEAN
TEMP REAL
TEMP_ALM BOOLEAN
TEMP_LO BOOLEAN

Settings

Unit Step
- -
- 0.01
- 0.01
- 0.01
- 0.01
s 0.001
s 0.001
s 0.001
s 0.001
s 0.001
Default Description
0 Block of function
0 Block all the alarms
0.0 Level input from CB
0.0 Temperature of the insulation medium from CB
0 Level alarm signal
0 Level lockout signal
0 Set level lockout
0 Set temperature lockout
0 Reset level and temperature lockout
Description
Level service value
Level below alarm level
Level below lockout level
Temperature of the insulation medium
Temperature above alarm level
Temperature above lockout level
Default Description
Disabled Disable/Enable Operation
5.00 Alarm setting for level
3.00 Level lockout setting
30.00 Temperature alarm level setting of the medium
30.00 Temperature lockout level of the medium
0.000 Time delay for level alarm
0.000 Time delay for level lockout indication
0.000 Time delay for temperature alarm
0.000 Time delay for temperture lockout
0.000 Reset time delay for level alarm
Section 14
Monitoring
679