Signals - ABB REL650 series Technical Manual

1MRK 506 335-UUS A
14.10.4
14.10.5
14.10.6
14.11
14.11.1
14.11.2
Technical manual

Signals

Table 479: SPGGIO Input signals
Name Type
BLOCK BOOLEAN
IN BOOLEAN
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
Operation principle
Upon receiving a signal at its input, IEC61850 generic communication I/O functions
(SPGGIO) function sends the signal over IEC 61850-8-1 to the equipment or system that
requests this signal. To get the signal, PCM600 must be used to define which function
block in which equipment or system should receive this information.
IEC 61850 generic communication I/O functions 16
inputs SP16GGIO
Identification
Function description
IEC 61850 generic communication I/O
functions 16 inputs
Functionality
IEC 61850 generic communication I/O functions 16 inputs SP16GGIO function is used to
send up to 16 logical signals to other systems or equipment in the substation.
Default Description
0 Block of function
0 Input status
IEC 61850 IEC 60617
identification identification
SP16GGIO -
Section 14
Monitoring
ANSI/IEEE C37.2
device number
-
655