Settings - ABB REL650 series Technical Manual

Section 12
Scheme communication
12.4.5
Table 349: ZCLCPLAL Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
LoadCurr 1 - 100
LossOfLoad Disabled
Enabled
ZoneExtension Disabled
Enabled
MinCurr 1 - 100
tLowCurr 0.000 - 60.000
tLoadOn 0.000 - 60.000
tLoadOff 0.000 - 60.000
Table 350: ZCLCPLAL Non group settings (basic)
Name Values (Range)
GlobalBaseSel 1 - 6
514
Name Type
EXACC BOOLEAN
BC BOOLEAN
LLACC BOOLEAN
Table 348: ZCLCPLAL Output signals
Name Type
TRZE BOOLEAN
TRLL BOOLEAN

Settings

Unit Step
- -
%IB 1
- -
- -
%IB 1
s 0.001
s 0.001
s 0.001
Unit Step
- 1
Default Description
0 Connected to function used for tripping at zone
extension
0 Breaker Close
0 Connected to function used for tripping at loss of load
Description
Trip by zone extension
Trip by loss of load
Default Description
Disabled Disable/Enable Operation
10 Load current before disturbance in % of IBase
Disabled Enable/Disable operation of Loss of load
Disabled Enable/Disable operation of Zone extension
5 Level taken as current loss due to remote CB
trip in % of IBase
0.200 Time delay on pick-up for MINCURR value
0.000 Time delay on pick-up for load current release
0.300 Time delay on drop off for load current release
Default Description
1 Selection of one of the Global Base Value
groups
1MRK 506 335-UUS A
Technical manual