Settings - ABB REL650 series Technical Manual

Section 11
Control
11.4.2.5
Table 255: SCSWI Non group settings (basic)
Name Values (Range)
CtlModel Dir Norm
SBO Enh
PosDependent Always permitted
Not perm at 00/11
tSelect 0.000 - 60.000
tSynchrocheck 0.00 - 600.00
tSynchronizing 0.00 - 600.00
tExecutionFB 0.00 - 600.00
11.4.3
11.4.3.1
392

Settings

Unit Step
- -
- -
s 0.001
s 0.01
s 0.01
s 0.01
Circuit breaker SXCBR
Signals
Table 256: SXCBR Input signals
Name Type
BLOCK BOOLEAN
LR_SWI BOOLEAN
OPEN BOOLEAN
CLOSE BOOLEAN
BL_OPEN BOOLEAN
BL_CLOSE BOOLEAN
BL_UPD BOOLEAN
POSOPEN BOOLEAN
POSCLOSE BOOLEAN
TR_OPEN BOOLEAN
TR_CLOSE BOOLEAN
RS_CNT BOOLEAN
XIN BOOLEAN
Default Description
SBO Enh Specifies control model type
Always permitted Permission to operate depending on the
position
30.000 Maximum time between select and execute
signals
10.00 Allowed time for synchronism-check to fulfil
close conditions
0.00 Supervision time to get the signal
synchronizing in progress
30.00 Maximum time from command execution to
termination
Default Description
0 Block of function
0 Local/Remote switch indication from switchyard
0 Pulsed signal used to immediately open the switch
0 Pulsed signal used to immediately close the switch
0 Signal to block the open command
0 Signal to block the close command
0 Steady signal for block of the position updating
0 Signal for open position of apparatus from I/O
0 Signal for close position of apparatus from I/O
0 Signal for open position of truck from I/O
0 Signal for close position of truck from I/O
0 Resets the operation counter
0 Execution information from CSWI
1MRK 506 335-UUS A
Technical manual