Single Point Generic Control 8 Signals Spc8Ggio - ABB REL650 series Technical Manual

1MRK 506 335-UUS A
11.9
11.9.1
11.9.2
11.9.3
11.9.4
Technical manual

Single point generic control 8 signals SPC8GGIO

Identification
Function description
Single point generic control 8 signals
Functionality
The Single point generic control 8 signals SPC8GGIO function block is a collection of 8
single point commands, designed to bring in commands from REMOTE (SCADA) to
those parts of the logic configuration that do not need extensive command receiving
functionality (for example, SCSWI). In this way, simple commands can be sent directly
to the IED outputs, without confirmation. The commands can be pulsed or steady with a
settable pulse time.
Function block
SPC8GGIO
BLOCK ^OUT1
PSTO ^OUT2
^OUT3
^OUT4
^OUT5
^OUT6
^OUT7
^OUT8
IEC09000086_1_en.vsd
IEC09000086 V1 EN
Figure 222: SPC8GGIO function block
Signals
Table 311: SPC8GGIO Input signals
Name Type
BLOCK BOOLEAN
PSTO INTEGER
IEC 61850 IEC 60617
identification identification
SPC8GGIO
Default Description
0 Block of function
2 Operator place selection
Section 11
Control
ANSI/IEEE C37.2
device number
- -
483