Password - Danfoss VLT AutomationDrive FC 360 Programming Manual

Parameter Descriptions
0-51 Set-up Copy
Option:
[9] Copy from
Factory setup

4.1.6 0-6* Password

4 4
0-60 Main Menu Password
Range:
0 [0 - 999 ] Define the password for access to the Main Menu
*
28
Programming Guide
Function:
Copy factory setting to programming set-
up (selected in parameter 0-11 Programming
Set-up).
Function:
via the [Main Menu] key. Setting values to 0
disables the password function.
Danfoss A/S © Rev. 2014-03-31 All rights reserved. MG06C402