Connecting Workpoint Clients; Making Trunk Connections - Siemens HiPath 5000 Service Manual

The special REAL board is mounted on the metal back panel (basic cabinet only) and connect-
ed to the backplane with a ribbon cable.
4.3.7

Connecting Workpoint Clients

For information, see Chapter 10.
4.3.8

Making trunk connections

Refer to the following board descriptions for information:
STMD8 (S trunk connection)
●
0
TMS2 (Not for U.S.) (S
●
TMAMF (for selected countries only)
●
TML8W (Not for U.S.) (MSI)
●
TIEL
●
TMDID8 (for U.S. only)
●
TMGL8 (for U.S. only)
●
TMST1 (for U.S. only)
●
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
trunk connection)
2M
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
inst_h3.fm
4-163