Siemens HiPath 5000 Service Manual page 797

Step
9. Before upgrading a license key, the following content of the displayed dialog must be
observed:
Legal notice: The licensing conditions must be accepted.
●
Notes: Notes on this procedure can be entered here. A distinction is made here
●
between internal notes (only accessible to users authorized to create licenses)
and customer notes (generally accessible).
Registered company and user: Company and user-specific data is displayed.
●
Upgrade details: MAC address of the HiPath 3000 control board.
●
Licenses to be used: The outcome of this procedure is displayed.
●
Example:
HiPath HG 1500 V2 & V3:
– 6 features (Licenses) will be upgraded as a result of this transaction.
– 6 features (Licenses) will be disabled as a result of this transaction.
This means that all six available licenses have been linked with the new MAC ad-
dress. The old link with the HG 1500 board MAC address (Locking ID) was dis-
abled for all six licenses.
Click the Execute button. The license key is upgraded.
10. After successful execution, the message "License Key Generation Complete" ap-
pears The upgrade information and the information about the license key will be dis-
played.
Note: The number of pre-installed HG 1500-B channels is no longer displayed, nut
only the effective total for the released licenses.
11. Upgrading involves either a single HiPath
3000 system or several networked sys-
tems without HiPath 5000 RSM:
Steps 4 to 10 must be repeated for all
available HG 1500 boards.
Note: The new licensing applies on a sys-
tem-by-system basis. A separate license
key is generated for each HiPath 3000
system.
12. Invoke the License Management Center homepage.
13. Activate the "View Used Licenses and Certificates" function under "Management of
Used Licenses".
Various search criteria are displayed for calling the recently upgraded license key.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Activity (Remarks)
Upgrading involves several networked Hi-
Path 3000 systems with HiPath 5000
RSM:
Steps to 4 must be repeated for all avail-
able HG101500 boards.
Note: New licenses apply to the entire
network. In other words, a single license
key is generated for the entire HiPath
3000/5000 network. This file is linked with
the MAC address of the HiPath 3000 con-
trol board with the lowest node number
(node ID).
licensing.fm
Licensing
Licensing Scenarios
8-19