Not For U.s.: Entering The System Number - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:
Table of Contents

Advertisement

5.3.5

Not for U.S.: Entering the System Number

Introduction
Corresponding to the configuration, the system station number must be entered (without the
DID number or attendant code) on the system telephone that is assigned 100 as its internal
station number.
The system station number is determined by the network or service provider.
Depending on the configuration type, system station numbers should not be entered for
point-to-multipoint operation or for tie trunks to HiPath 4000, for example.
Example
Port number: 98008
National number: 2302 (prefix without 0)
International number: 49 (country code)
Station number type: international
Input procedure
Table 5-8
Entering the System Number
Step
1.
2.
Service
3.
XXXXX
4.
5.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Entry
*95
System administration code
User name (identification)
Enter password
Watch the display.
Scroll until "ISDN parameters" and "PABX number" appear.
Confirm your selection.
OR:
Expert mode: Enter the code 20 2 1 to 4.
Follow the user prompting on the display.
Starting Up HiPath 3000
Starting Up HiPath 3750 and HiPath 3700
Description
start_h3.fm
5-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 3000Hipath 3800

Table of Contents