System Data; Overview - Siemens HiPath 5000 Service Manual

2

System Data

2.1

Overview

Chapter contents
This chapter discusses the topics listed in the following table.
HiPath 3000, page 2-3
Introduction, page 2-3 (electrical environment, systems)
●
Design and Dimensions of the HiPath 3000 Systems, page 2-4:
●
- Design and Dimensions of HiPath 3800
- Design and Dimensions of HiPath 3750
- Design and Dimensions of HiPath 3550
- Design and Dimensions of HiPath 3350
- Design and Dimensions of HiPath 3700
- Design and Dimensions of HiPath 3500
- Design and Dimensions of HiPath 3300
System Environment of the HiPath 3000 Systems, page 2-13:
●
- HiPath 3800 System Environment
- HiPath 3750 and HiPath 3700 System Environment
- HiPath 3550 System Environment
- HiPath 3350 System Environment
- HiPath 3500 System Environment
- HiPath 3300 System Environment
HiPath 5000, page 2-19
System-Specific Capacity Limits for HiPath 3000, HiPath 5000, page 2-22
Static Configuration Rules, page 2-24
Dynamic Configuration Rules, page 2-26
Gateway Channels (DSP Channels), page 2-26
●
MOH Channels (G.711, G.723, G.729), page 2-28
●
IP Networking Channels (PBX Networking Channels), page 2-28
●
Bandwidth Control for IP Networking Channels (PBX Networking Channels), page 2-29
●
DMC (Direct Media Connection) Channels, page 2-29
●
ISDN Routing/PPP Channels, page 2-29
●
Fax / Modem Channels, page 2-30
●
Determining the Number of HG 1500 Boards Required, page 2-31
●
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Topic
sysdat.fm
System Data
Overview
2-1