Siemens HiPath 5000 Service Manual page 1042

service.fm
Service
Security Features
Step
8.
Notes:
On step 4 and step 5: If a new password is issued, both steps are omitted when calling
●
the system again.
On step 6: No country adjustment is necessary for Germany because the system starts
●
up with German codes.
On step 7: When selecting the fixed password, the default password (31994) overwrites
●
the new password entered under step 4.
Variable password concept
Up to 16 users can be assigned their own user ID with individual name, password, and a user
group consisting of six pre-determined user groups (in Table 12-9). Only the data authorized
for the relevant user group can be read and administrated.
During the first login, the system requests the identity of the user and asks for a new password
(max. 15 characters from the optiPoint 500 or optiset E character set). This then overwrites the
default user name (31994) and default password (31994). This first user is then automatically
assigned to the user group "System Maintenance". The system informs the user that no user
is configured in the system and that the user has been assigned with "System Maintenance"
authorization. Using HiPath 3000 Manager E or Assistant T, additional users and their pass-
words can be configured in the user administration.
If a user forgets a password, it has to be deleted and re-configured by a different authorized
user. If all authorized users forget their passwords, the system must be regenerated.
Fixed password concept
When using a fixed password, only fixed user groups with unchangeable default user names
and default passwords are used. Also, new users cannot be configured in the user administra-
tion.
12-80
Entry
XX You are prompted to enter the country code (see Page A-
26). The system then boots up with the country-specific
default information.
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Description
P31003-H3560-S403-54-7620, 09/05