Figure 4-28 Hipath 3800 - Pcm Highways In The Expansion Cabinet - Siemens HiPath 5000 Service Manual

– PCM segment for board slots 7 – 10 = 128 time-division multiplex channels (four PCM
highways)
DIUN2, DIU2U (for U.S. only) and STMI2 use the PCM highways from bundle F. Thus there
are an additional 128 time-division multiplex channels available for slots 1 – 5 and for slots
7 – 10 for these boards.
If more than the 2 x 128 time-division multiplex channels from bundle F are required be-
cause of the configuration with these boards, the system will automatically resort to time-
division multiplex channels from bundle A. However, only complete boards are activated on
the other trunk group. The remaining time-division multiplex channels remain free.
Two-cabinet system (basic cabinet + expansion cabinet)
●
All peripheral boards use the PCM highways from bundle A only.
Expansion cabinet: PCM highways
PCM highway bundle A
with 2 x 4 PCM highways
Connection to the PCM highway
bundle F in the basic cabinet
PCM highway bundle F
HDLC connection to the basic cabinet
Figure 4-28 HiPath 3800 - PCM Highways in the Expansion Cabinet
The expansion cabinet provides a PCM highway bundle with 2 x 4 PCM highways. There are
32 time-division multiplex channels available for each PCM highway.
PCM segment for board slots 1 – 6 = 128 time-division multiplex channels (four PCM high-
●
ways)
PCM segment for board slots 8 – 14 = 128 time-division multiplex channels (four PCM high-
●
ways)
PCM highway bundle F is not used.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
(not used)
HDLC
inst_h3.fm
Installing HiPath 3000
Installing HiPath 3800
4-47