Siemens HiPath 5000 Service Manual page 716

start_h5.fm
HiPath 5000 Startup and Administration
Installation Requirements
Table 6-4 Prerequisites for a Single-PC Solution
HiPath Software
Manager
3
DLS
HiPath Manager
PCM V2.0
HiPath FM
3
Teledata Office
HPCO including Hi-
3
Path Xpressions
3
HPCO
1 Every HiPath 3000 gateway, every survivable media gateway and every HiPath ComScendo service counts as a node.
2 Networks are currently released with up to 32 nodes. Larger configurations can be released on a project-specific basis.
3 We do not recommend installing DLS, Teledata Office, HPCO (including HiPath Xpressions), and HiPath ComScendo Ser-
vice together on a PC. Real-time operation of the HiPath ComScendo Service cannot be guaranteed if the lion's share of
processor resources is required for DLS, Teledata Office, HPCO (including HiPath Xpressions). Software updates, call
charge data queries, statistics, etc. must be performed during off-peak hours when few or no calls are underway.
If the customer is unwilling to accept restrictions, HiPath ComScendo Service must be installed on a separate PC.
6-12
Upgrade V4.0 to
V6.0
1-node system
(1 GHz CPU)
possible
possible
possible
possible
possible
up to 248 stations
possible
1 to 32 agents
possible
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
1
2 nodes 3 - 6
1
(3 GHz nodes
CPU) (3 GHz
CPU)
possible possible possible possible possible
possible possible possible possible possible
possible possible possible possible possible
possible possible possible possible possible
possible possible possible possible possible
up to 248 up to 248
stations stations
possible possible
1 to 32 1 to 32
agents agents
possible possible
7 - 16 17 - 32
1 1
nodes nodes
(3 GHz (3 GHz
CPU) CPU)
up to 248 not pos-
stations sible
possible
1 to 32 not pos-
agents sible
possible
P31003-H3560-S403-54-7620, 09/05
2
33 - 64
1
nodes
(3 GHz
CPU)
not pos-
sible
not pos-
sible