Installing Hipath 3800; Installation Procedure - Siemens HiPath 5000 Service Manual

inst_h3.fm
Installing HiPath 3000

Installing HiPath 3800

4.2.2

Installation Procedure

Table 4-1 HiPath 3800 - Installation Procedure
Step
Installing HiPath 3800 (Standalone)
1. Selecting the Installation Site, page 4-5
(usually predetermined)
2. Unpacking the Components, page 4-7
3. Setting up the System Cabinets (from
Single Cabinet
Two cabinets (stacked)
Two cabinets (side by side)
4. Grounding the System, page 4-15
Checking the Grounding, page 4-20
5.
6.
7. If required: use an external main distribution frame or external patch panel,
Main Distribution Frame MDFU-E
●
Patch Panel S30807-K6143-X
●
S Patch Panel C39104-Z7001-B3
●
0
8. Loading the System Software and Installing Subboards on the CBSAP, page 4-81
9.
10.
11.
4-4
Installation Activity
Page 4-8):
Installing Boards (Configuration Notes), page 4-31
Connecting the Cable to the Backplane, page 4-51
Connecting Workpoint Clients, page 4-82
Making Trunk and Networking Connections, page 4-82
Performing a Visual Inspection, page 4-83
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Installing HiPath 3800 (19-Inch Cabi-
Selecting the Installation Site, page 4-21
(generally determined by the existing 19-
Unpacking the Components, page 4-24
Mounting System Cabinets in the 19-Inch
Grounding the System, page 4-28
Checking the Grounding, page 4-30
from Page 4-66:
net)
inch cabinet)
Cabinet, page 4-25
P31003-H3560-S403-54-7620, 09/05