Figure 3-45 Hxgm3 - Interfaces - Siemens HiPath 5000 Service Manual

boards.fm
Boards for HiPath 3000
Peripheral Boards
Interfaces/connectors
The HXGM3 board provides the following connectors:
X10: 9-pin Sub-D plug for V.24 interface
●
Backplane: The LAN adapter connector C39228-A7195-A10 (see Figure 3-46) is inserted
●
directly on the backplane connector SU Xx8 or SU Xx9 for a LAN connection. The LAN ca-
ble is connected via the RJ45 socket of the adapter.
For U.S. only: The LAN connection is made using a special adapter cable (CHAMP in ac-
cordance with RJ45) (see Figure 3-47).
Both LAN interfaces allow access to the Ethernet standard (IEEE 802.3) with 10 Mbps or
100 Mbps with automatic configuration. Manual configuration is also possible.
LED H0 (red)
LED H1 (green)
V.24 interface X10
Figure 3-45 HXGM3 - Interfaces
3-102
HGA slot 2
HGA slot 0 HGA slot 1
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Backplane
LAN connections
via LAN adapter
connector:
LAN 2 (SU Xx8)
LAN 1 (SU Xx9)
P31003-H3560-S403-54-7620, 09/05