Siemens HiPath 5000 Service Manual page 987

Hide thumbs Also See for HiPath 5000:

Table of Contents

For ISDN boards, the status of the reference clock is displayed:

No reference clock

Reference clock for clock generator is created.

When viewing the board status using the HiPath 3000 Manager E, all peripheral boards inte-

grated into the system are presented in a table. The status display is updated every 3 seconds.

With Assistant T, you can only view the status of one board at a time. You can also update the

status display by pressing a key.

You cannot perform additional activities with the HiPath 3000 Manager E and Assistant T while

viewing the status of a board.

HiPath 3000 Manager E - Example of Status Display of Peripheral Boards

HiPath 3750 and HiPath 3700: LEDs on peripheral boards

All peripheral boards are equipped with LEDs for displaying the status of a board or port. Infor-

mation on the meaning of the individual LED statuses can be found in the descriptions of indi-

vidual boards in Chapter 3.

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

Guided Maintenance

Chapters

Table of Contents

Hipath 3000 Hipath 3800