Siemens HiPath 5000 Service Manual page 1115

Table B-1 Codes for Activating/Deactivating Features
TDM workpoint
clients without
display,
CMI mobile
phones,
analog work-
point clients
Feature
Return to held *0 or
call (exclusive CMI, DTMF:
hold off) Flash
TDM WpC with-
out display:
Consultation
hold key
Abbreviations:
●
Call states: RH = idle, BR = ready, WA = digit input, BS = busy, RK = incoming call, RG = outgoing call, GS = call
●
Key programming: V = key can be programmed with complete feature, U = key can be programmed to start procedure, T = key with
toggle functionality
●
Menu level: H = Main menu, U1 = 1st submenu, U2 = 2nd submenu
1 The codes are valid for DTMF telephones. Substitution codes 75 and 76 must be entered instead of "*" and "#" for DP tele-
phones.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Operating procedure for
TDM workpoint clients with
S work- display,
0
point cli- CMI feature mobile phones,
ents IP workpoint clients,
optiClient 130 V5.0 phone
1
Key
Retrieve *0 –
Codes for Activating/Deactivating Features
optiCli-
optiCli-
ent 130
ent 130
V5.0
easy-
office
Com
Menu
– BR, U1 Mouse
WA, click, active
RG, key
GS,
BS
Sup-
ported
Locking of
work-
feature
V5.0
point
clients
(see
abbre-
via-
tions
in
Table
B-1)
Local AN,
DIG,
menu ENT,
S0,
CMI,
IPSC,
IPSI
fcodes.fm
Note
B-25