Cip Protocols And Port Numbers Used With Hipath 3000/5000 V6.0; Opticlient 130 V5.0 - Siemens HiPath 5000 Service Manual

C IP Protocols and Port Numbers Used with HiPath
3000/5000 V6.0
This supplement contains information about the HiPath 3000/5000 V6.0 components men-
tioned in the following table.
The necessary information for erecting firewalls is provided on each component. Firewalls en-
sure that customer intranets are protected from external access.
Information on applications that can be used in HiPath 3000/5000 V6.0 can be found
>
in the relevant product documentation.
HiPath 3000, page C-2
HiPath 5000, page C-3
HiPath ComScendo Service, page C-5
HiPath FM Managed Systems, page C-7
HG 1500, page C-8
optiClient 130 V5.0, page C-11
optiPoint 400, optiPoint 410, optiPoint 410 S, optiPoint 420, optiPoint 420 S, optiPoint 600 of-
fice, page C-13
HiPath AP 1120, page C-16
Middleware for Call Control, page C-17
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
IP Protocols and Port Numbers Used with HiPath 3000/5000 V6.0
Topic
portnos.fm
C-1