Mounting Connector Panels (If Required) - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

Installing HiPath 3000

Installing HiPath 3800

Mounting Connector Panels (if required)

The HiPath 3800 has various connection options for connecting the peripherals. If you intend

to use connector panels, mount the panels supplied as follows:

Connector panels

with RJ45 jacks

Section 4.2.6.5)

For U.S. only:

Connector panels

with CHAMP jack

Section 4.2.6.6)

Attach a connector panel with 8 RJ45 jacks (S30807-

Q6624-X) to the SIVAPAC connector on the back-

Attach a connector panel with 24 RJ45 jacks (S30807-

Q6622-X) to the SIVAPAC connector on the back-

different or no as-

Use filler panels to cover the backplane sections of

other boards and empty board slots.

Attach a connector panel with CHAMP jacks (S30807-

Q6626-X) to the SIVAPAC connector on the back-

different or no as-

Use filler panels to cover the backplane sections of

other boards and empty board slots.

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

P31003-H3560-S403-54-7620, 09/05

Table of Contents

Hipath 3000 Hipath 3800