Siemens HiPath 5000 Service Manual page 765

Copying/renaming the transfer files
Proceed as follows if you want to use the call information in the transfer file for external process-
ing:
Switch to the folder containing the transfer file (default:
●
C:\coldir).
Rename the transfer file (default: gcallserve). The renamed file is now available for ex-
●
ternal processing.
The transfer file is automatically recreated in the specified folder with the file name saved
●
in the parameters and can be renamed again at a later point.
To avoid uncontrolled folder growth with the transfer file, an option is available for de-
>
leting the renamed transfer file after forwarding it for external use in this folder.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
HiPath 5000 Startup and Administration
start_h5.fm
GetAccount
6-61