Siemens HiPath 5000 Service Manual page 762

start_h5.fm
HiPath 5000 Startup and Administration
GetAccount
2. Enter the following data:
Field name
Mode
Transfer file
Transfer file folder
3. Click Save to save your inputs.
The changes you made only become effective after the GetAccount service is restarted.
The ASCII transfer file is automatically saved in the specified folder and extended to in-
clude the new call data. The file is extended by one line for each call data record. Each call
data record (line) is ended with CR+LF.
6-58
Meaning
Select the call data forwarding mode in this list field. The
following modes are available:
None save call charge data
●
The call data is not written to the transfer file. Select
this option.
Save call charge data
●
The call data is written to the transfer file.
The modes Export calls with calculation and Export and
save calls with calculation are intended for a future ex-
pansion.
Confirm the default file name (gcallserve) or enter a
different file name.
Confirm the default folder name (C:\coldir) or enter a
different folder name.
The transfer file is stored in the folder set here.
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
P31003-H3560-S403-54-7620, 09/05