Siemens HiPath 5000 Service Manual page 527

Table 4-4 Maximum Number of Time-Division Multiplex Channels Required Per Board
Board
SLMO8
STMD3
STMI2
4
STMI2 + PDMX
TM2LP
TMC16
TMDID
TMEW2
1 A time-division multiplex channel is required if a call is being conducted over the "home SLCN board" of a mobile tele-
phone. If a call is being conducted over a "Current location SLCN board", additional time-division multiplex channels will
be required. More information is provided in Section 11.6, "Multi-SLC and System-Wide Networking".
2 The maximum number of masters and slaves possible is taken into consideration.
3 Static time-division multiplex channel assignment for operation as a trunk board, dynamic assignment for operation as a
subscriber line module.
4 PDMX is not currently released.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Maximum number of time-division
multiplex channels required
2
16
16
32
64
8
16
8
4
Installing HiPath 3000
Installing HiPath 3800
Time-division multiplex
channel assignment
dynamic
3
static/dynamic
dynamic
dynamic
static
static
static
static
inst_h3.fm
4-49