Siemens HiPath 5000 Service Manual page 1017

Table 12-7 HiPath 3000 Class B Error Messages
No.
14 Overload Code Receiver CR
15 Overload Code Sender CS
Error Class B-23 - Network
60 System hold no buffer available
Error Class B-26 - Presence
0 Unknown card type
1 Board out of order
2 Maximum number of peripheral boards
exceeded
3 Board type not compatible, slot is already
pre-assigned with a different board model
4 Board is activated
Error Class B-28 - Recovery
0 COSMOS error: Data transmission not
possible
Error Class B-29 - IOP
0 COSMOS error
20 Port table queue is empty
24 Board malfunction
25 Board reset was detected
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Meaning Action
Recovery
– Check if these errors oc-
cur repeatedly or only
–
sporadically. If the errors
an additional CR8N board
can be used for HiPath
3750 and HiPath 3700.
An upgrade to the next
highest system may be
necessary for all other
Hard restart Notify appropriate service
–
Reload board
– Reduce peripheral boards
to maximum number
–
–
Hard restart Notify appropriate service
Hard restart Notify appropriate service
Hard restart
Reload board
Reload board
service.fm
Service
Guided Maintenance
Action
Technician
occur repeatedly,
systems.
support
Replace board
–
Replace board
–
support
support
–
–
12-55