Starting The Installation - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

Starting the Installation

A TAPI service provider must be installed on the relevant PC to enable the default setup to be

performed. Installation information can be found in Section 6.6.6.

Insert the installation CD.

The installation program is started via the autorun function. Alternatively you can initiate

Setup via Windows Explorer under <CD-ROM drive letter>:\setup.exe.

Select the language you require for the Setup browser. German (Germany) and English

(USA) versions are currently available.

The system is prepared for installation.

Click Next to start the installation routine.

Important installation information is displayed.

This includes the latest information on installation. Please read this information carefully.

Click Next to proceed with the installation routine.

Select destination path.

Select the folder where you want to install the program.

Confirm the default folder c:\program files\siemens\hipath\ with Next or click

Browse and select a different folder.

Select program folder.

Select the location where the setup should create the new shortcuts.

Confirm the default folder HiPath with Next or select a different folder.

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

HiPath 5000 Startup and Administration

Table of Contents

Hipath 3000 Hipath 3800