Online help
●
Connection
The optiPoint 410 display module must always be installed as the first add-on device, in other
words, connected directly to the telephone.
The connection to the telephone is made over an interface cable with the following connectors:
input MW6, output MW8. The power supply is ensured via the connected telephone.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
optiPoint 410 / optipoint 410 S and optiPoint 420 / optiPoint 420 S
wclient.fm
Workpoint Clients
10-63