Slmo2, Slmo8; Figure 3-80 Slmo2/Slmo8 - Leds On The Front Panel - Siemens HiPath 5000 Service Manual

boards.fm
Boards for HiPath 3000
Peripheral Boards
3.3.16

SLMO2, SLMO8

Introduction
The SLMO2 and SLMO8 boards (Subscriber Line Module Optiset) provide U
use in HiPath 3800:
SLMO2 (S30810-Q2168-X10) = 24 U
●
SLMO8 (S30810-Q2168-X100) = eight U
●
Front panel
Two LEDs indicating the board status:
LED (red)
●
LED (green)
●
Figure 3-80 SLMO2/SLMO8 - LEDs on the Front Panel
To ensure sufficient shielding, provide the board with a shielding panel. For informa-
>
tion on mounting the shielding panel, see Section 4.2.5.2.
3-196
interfaces
P0/E
interfaces
P0/E
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
interfaces for
P0/E
P31003-H3560-S403-54-7620, 09/05