Siemens HiPath 5000 Service Manual page 1076

pcodes.fm
System Programming Codes (Expert Mode Codes)
Table A-3 Expert Mode Codes
Code
22 13 2 2
22 13 2 3
22 13 2 4
22 13 2 5
22 13 2 6
22 14
22 14 1
22 14 2
22 15
22 16
22 16 1
22 17
22 17 1
22 17 2
22 18
22 19
22 19 1
22 19 2
22 20
22 21
22 22
22 23
22 24
22 25
22 26
22 27
22 28
A-18
Port for CDRS (call detail recording at station), output: 0 = none, 1 = V.24
port, 2 = UPN port
Port for CDRT (call detail recording per trunk), output: 0 = none, 1 = V.24
port, 2 = UPN port
Port for CDB printout
Port for CDR printout
Port for CDRA (call detail recording, attendant); if a pay phone is config-
ured, also see code 11 8), output: 0 = none, 1 = V.24 port, 2 = UPN port
Call FWD, external
Connect call: 0 = On answer, 1 = Immediately.
Call forwarding: 0 = deactivate, 1 = activate
Caller list mode: 1 = Only external, 2 = External and Internal, 3 = External
ring/call
Applications
Call distribution: 0 = no, 1 = yes
Tones
Conference, Warning tone: 0 = off, 1 = on
Call pickup, Warning tone: 0 = off, 1 = on
Transfer key (Retrieve): 1 = Press once, 2 = Press twice
Class of service
Night answer, Pos. 1-5; enter station
Central telephone lock
DTMF automatic: 0= no, 1 = yes
Key click: 0=Off, 1= Volume 1 ... 4 = Volume 4
DTMF - Pulse/Pause: 1 = 70/70 msec, 2 = 80/80 msec, 3 = 80/250 msec,
4 = 200/200 msec
Phone lock destination
Stn. relocate: 0 = denied, 1 = allowed
Trunk reservation: 0 = off, 1 = on
Speaking volume: 0 = default, 1 = high
CO features (Transfer/Conference/Drop): 0 = disabled, 1 = enabled
Feature Identification Number (FIN) for Transfer (U.S. only)
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Function
P31003-H3560-S403-54-7620, 09/05