Download  Print this page

Siemens HiPath 2000 Administration Manual

Hide thumbs

Advertisement

Documentation
HiPath 2000, HiPath 3000, HiPath 5000,
HiPath OpenOffice
OpenStage 20, OpenStage 40, OpenStage 60,
OpenStage 80
Administration Manual
A31003-S2010-M100-10-7619
Communication for the open minded
Siemens Enterprise Communications
www.siemens.com/open

Advertisement

loading

  Summary of Contents for Siemens HiPath 2000

  • Page 1 Documentation HiPath 2000, HiPath 3000, HiPath 5000, HiPath OpenOffice OpenStage 20, OpenStage 40, OpenStage 60, OpenStage 80 Administration Manual A31003-S2010-M100-10-7619 Communication for the open minded Siemens Enterprise Communications www.siemens.com/open...
  • Page 3: Table Of Contents

    3.2.2.2 Manual configuration of a VLAN ID ....... . 3-9 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 4 3.7.7.2 Download Screensaver ......... 3-56 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 5 3.16.2.23 Web Based Management ........3-89 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 6 Index ..............7-1 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 7: Overview

    Consult the dealer or an experienced radio/TV technician for help. This product is a UL Listed Accessory, I.T.E., in U.S.A. and Canada. This equipment also complies with the Part 68 of the FCC Rules and the Industrie Canada CS-03. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 8: Maintenance Notes

    Do not operate the telephone in environments where there is a danger of ex- plosions. Use only original Siemens accessories. Using other accessories may be dan- gerous, and will invalidate the warranty and the CE mark. Never open the telephone or a key module. If you encounter any problems, contact System Support.
  • Page 9: The Openstage Family

    With the TouchSlider, the user can adjust the volume, e.g. of ringtones. Inbound calls are visually signaled on the Call Display. The keypad is used for entering phone numbers and text. Table 1-1 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 10: Openstage 40

    The Audio Keys let you optimize the audio settings on your telephone. Inbound calls are visually signaled on the Call Display. The keypad is used for entering phone numbers and text. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 11: Openstage 20

    This method employs a web browser for communication with the phone via HTTP or HTTPS. It is applicable for remote configuration of individual IP phones in your network. Direct access to the phone is not required. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 12: Deployment Service (Dls)

    This method provides direct configuration of an the OpenStage phone. Direct access to the phone is required. As long as the IP connection is not properly configured, you have to use this method > to set up the phone. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 13: Startup

    • A HiPath Communications System: HiPath 2000, HiPath 3000, HiPath 5000, or HiPath OpenOffice • An FTP Server for file transfer, e. g. firmware, configuration data, application software •...
  • Page 14: Assembling And Installing The Phone

    Handset cable • Subpackage: • Document "Information and Important Operating Procedures" • Emergency number sticker 2.2.2 Connectors at the bottom side OpenStage 60 Keyboard Power supply Extension Switch Headset Key Module Handset A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 15 Startup Assembling and Installing the Phone OpenStage 40 (similar to OpenStage 20, except [1] OpenStage 40 only Power supply Switch Headset Key Module Handset A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 16: Assembly

    Power Class 3 OpenStage 60/80 G Power Class 3 OpenStage 60/80 G + 2nd Key Module External power unit required Includes 1 Key Module. Includes 1 Key Module + USB-Extension with Acoustic Unit. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 17 To prevent damage on the OpenStage phone, connect an USB stick using the adapter cable C39195-Z7704-A5. Do not connect a USB hub to the phone’s USB port, as this may lead to stability problems. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 18: Quick Start

    MAC address or E.164 number. For further information, see the Deployment Service Administration Manual. Any settings made by a DHCP server are not configurable by other configuration > tools. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 19: Access The Web Interface (Wbm)

    If you click on an item printed in bold letters, a sub-menu opens in the right column. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 20: Basic Network Configuration

    It is recommended to define a vendor class on the DHCP server, thus enabling server and phone to exchange vendor-specific data exclusively. The data is disclosed from other clients. The following steps are required for the configuration of the Windows DHCP server. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 21 In the DHCP console menu, right-click the DHCP server in question and select Define Vendor Classes... in the context menu. A dialog window opens with a list of the classes that are already available. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 22 Next, two options resp. tags will be added to the vendor class. Two passes are needed for this: in the first pass, tag #1 with the required value "Siemens" is entered, and in the second pass, the VLAN ID is entered as tag #2.
  • Page 23 In the DHCP console menu, right-click the DHCP server in question and select Set Pre- defined Options from the context menu. In the dialog, select the previously defined OptiIpPhone class and click on Add... to add a new option. A31003-S2010-M100-10-7619, 27/08/2008 2-11 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 24 Description: Free text. Enter the value for this option. First Pass: "Siemens" Second Pass: VLAN ID 10. Press OK, repeat steps 7 to 9 for the second pass, and press OK again. A31003-S2010-M100-10-7619, 27/08/2008 2-12 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 25 13. The DHCP console now shows the information that will be transmitted for the correspond- ing workpoints. Information from the Standard vendor is transmitted to all clients, whereas information from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in this vendor class. A31003-S2010-M100-10-7619, 27/08/2008 2-13 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 26: Using Option #43 "Vendor Specific

    The Vendor name tag is coded as follows (the first line indicates the ASCII values, the second line contains the hexadecimal values): Code Length Vendor name Table 2-1 The following example shows a VLAN ID with the decimal value "10": Code Length VLAN ID Table 2-2 A31003-S2010-M100-10-7619, 27/08/2008 2-14 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 27 Select the DHCP server and the scope. Choose "Configure Options" in the context menu using the right mouse button. Enter the VLAN ID. Providing the length is not required here, as the VLAN ID is always 4 Bytes long. A31003-S2010-M100-10-7619, 27/08/2008 2-15 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 28: Dls Server Address

    In the Windows Start menu, select Start > Programs > Administrative Tools > DHCP. In the DHCP console menu, right-click the DHCP server in question and select Define Vendor Classes... in the context menu. A31003-S2010-M100-10-7619, 27/08/2008 2-16 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 29 Define a new vendor class with the name OptiIpPhone and enter a description of this class. Click OK to apply the changes. The new vendor class now appears in the list. Exit the window with Close. A31003-S2010-M100-10-7619, 27/08/2008 2-17 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 30 Next, two options resp. tags will be added to the vendor class. Two passes are needed for this: in the first pass, tag #1 with the required value "Siemens" is entered, and in the second pass, the DLS address is entered as tag #3.
  • Page 31 Code: "1" • Description: Free text. Second Pass: Option 3 • Name: Free text, e. g. "OptiIpPhone element 03" • Data type: "String" • Code: "3" • Description: Free text. A31003-S2010-M100-10-7619, 27/08/2008 2-19 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 32 10. Press OK, repeat steps 7 to 9 for the second pass, and press OK again. Defining the scope for the new vendor class 11. Select the DHCP server in question and the Scope and right-click Scope Options. Select Configure Options... in the context menu. A31003-S2010-M100-10-7619, 27/08/2008 2-20 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 33 13. The DHCP console now shows the information that will be transmitted for the correspond- ing workpoints. Information from the Standard vendor is transmitted to all clients, whereas information from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in this vendor class. A31003-S2010-M100-10-7619, 27/08/2008 2-21 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 34 # Tag/Option #1: Vendor "Siemens" 01:07:53:69:65:6D:65:6E:73: # Tag/Option #3: DLS IP Address (here: sdlp://192.168.3.30:18443) 25 s d 3 ..etc. 03:19:73:64:6C:70:3A:2F:2F:31:39:32:2E:31:36:38:2E:33:2E:33:30: 3A:31:38:34:34:33; match if substring (option vendor-class-identifier, 0, 11) = "OptiIpPhone"; A31003-S2010-M100-10-7619, 27/08/2008 2-22 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 35: Using Option #43 "Vendor Specific

    Code Length DLS IP address s d l p : / / 1 9 2 . 1 6 8 . 2 . 1 9 : 1 8 4 4 3 A31003-S2010-M100-10-7619, 27/08/2008 2-23 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 36 Select the DHCP server and the scope. Choose "Configure Options" in the context menu using the right mouse button. [Engl. Screenshot] Enter the IP address and port number of the DLS server. A31003-S2010-M100-10-7619, 27/08/2008 2-24 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 37: Hfa Gateway Settings

    Enter the phone’s subscriber number, which will also serve as internal phone number. Enter the password associated with the subscriber number. After the data has been entered, select Save & exit and press A31003-S2010-M100-10-7619, 27/08/2008 2-25 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 38 Startup Quick Start A31003-S2010-M100-10-7619, 27/08/2008 2-26 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 39: Administration

    By default, password entry is in numeric mode. For changing the mode, press the # key once or repeatedly, depending on the desired character. The # key cycles around the input modes as follows: (Abc) -> (abc) -> (123) -> (ABC) -> back to start. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 40 - open a context menu - delete character left - down one level of cursor - up one level Press the key briefly: - scroll down Hold down: - scroll to end of list A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 41 Switch to punctuation and special characters. Toggle between lowercase characters, uppercase characters, and digits in the following order: (Abc) -> (abc) -> (123) -> (ABC) -> back to start. Table 3-1 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 42 Navigator, you can enter, delete, copy and paste characters and numbers as well as nav- igate within an entry and toggle the input mode.Save and exit When you are done, select Save & exit and press A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 43: Lan Settings

    PC port mode / PC port status: Controls the PC port. Value range: "Disabled", "Enabled", "Mirror". Default: "Disabled". • PC port autoMDIX: Switches between MDI and MDI-X automatically. Value range: "On", "Off". Default: "Off". A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 44 Network > Port configuration Administration via Local Phone --- Admin --- Network --- Port Configuration --- Number |--- LAN port speed |--- PC port status |--- PC port speed --- PC port autoMDIX A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 45: Vlan

    VLAN over DHCP format. If a phone configured for VLAN discovery by DHCP fails to dis- cover its VLAN, it will proceed to configure itself from the DHCP within the non-tagged LAN. In these circumstances network routing will probably not be correct. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 46 Administration LAN Settings Administration via WBM Network > IP configuration Administration via Local Phone --- Admin --- Network --- IP Configuration --- VLAN discovery A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 47: Manual Configuration Of A Vlan Id

    DHCP server cannot be found, in fixed IP mode no server connections will be pos- sible. Administration via WBM Network > IP configuration Administration via Local Phone --- Admin --- Network --- IP Configuration --- VLAN ID A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 48: Ip Network Parameters

    Layer 2 signalling: Sets the CoS (Class of Service) value for signaling. Value range: 0-7. Default: 3. • Layer 2 default: Sets the default CoS (Class of Service) value.Value range: 0-7. Default: 0. A31003-S2010-M100-10-7619, 27/08/2008 3-10 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 49: Layer 3 / Diffserv

    EF in a multiple dropping system. The AF values are containing two digits X and Y (AFXY), where X is describing the priority class and Y the drop level. Four classes X are reserved for AFXY: AF1Y (high priority), AF2Y, AF3Y and AF4Y (low priority). A31003-S2010-M100-10-7619, 27/08/2008 3-11 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 50 Default: "AF31". Administration via WBM Network > QoS Administration via Local Phone --- Admin --- Network --- QoS --- Service |--- Layer 3 |--- Layer 3 voice --- Layer 3 signalling A31003-S2010-M100-10-7619, 27/08/2008 3-12 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 51: Use Dhcp

    SNTP IP Address (NTP Server option 42) • Timezone offset (Time Server Offset option 2) • Primary/Secondary IP Addresses (DNS Server option 6) • DNS Domain Name (DNS Domain option 15) • Vendor Unique (option 43) A31003-S2010-M100-10-7619, 27/08/2008 3-13 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 52 Administration IP Network Parameters Administration via WBM Network > IP configuration Administration via Local Phone --- Admin --- Network --- IP Configuration --- Use DHCP A31003-S2010-M100-10-7619, 27/08/2008 3-14 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 53: Ip Address - Manual Configuration

    Subnet mask: subnet mask that is needed for the subnet in use. Administration via WBM Network > IP configuration Administration via Local Phone --- Admin --- Network --- IP Configuration |--- IP address --- Subnet mask A31003-S2010-M100-10-7619, 27/08/2008 3-15 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 54: Default Route/Gateway

    The change will only have effect if you restart the phone. > Administration via WBM Network > IP configuration Administration via Local Phone --- Admin --- Network --- IP Configuration --- Default route (GW) A31003-S2010-M100-10-7619, 27/08/2008 3-16 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 55: Specific Ip Routing

    --- Admin --- Network --- IP Configuration |--- Route 1 IP |--- Route 1 gateway |--- Route 1 mask |--- Route 2 IP |--- Route 2 gateway --- Route 2 mask A31003-S2010-M100-10-7619, 27/08/2008 3-17 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 56: Dns

    This is the name of the phone’s local domain. Administration via WBM Network > IP configuration Administration via Local Phone --- Admin --- Network --- IP Configuration --- DNS domain A31003-S2010-M100-10-7619, 27/08/2008 3-18 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 57: Dns Servers

    Secondary DNS: IP address of the secondary DNS server. Administration via WBM Network > IP configuration Administration via Local Phone --- Admin --- Network --- IP Configuration |--- Primary DNS --- Secondary DNS A31003-S2010-M100-10-7619, 27/08/2008 3-19 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 58: Configuration & Update Service (Dls)

    Security mode / Secured: Determines whether the communication between the phone and the DLS is secure. Value range: "Default", "Secure". Default: "Default". Administration via WBM Network > Update Service (DLS) A31003-S2010-M100-10-7619, 27/08/2008 3-20 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 59: Snmp

    Default: "No". • Diagnostic destination: IP address or hostname of the SNMP manager receiving diag- nostic data. • Diagnostic destination port: Port on which the SNMP manager is receiving diagnostic data. A31003-S2010-M100-10-7619, 27/08/2008 3-21 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 60 QoS to generic destination / QoS to generic device: Enables or disables the sending of QoS traps to a generic destination. Value range: "Yes", "No". Default: "No". Administration via WBM System > SNMP A31003-S2010-M100-10-7619, 27/08/2008 3-22 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 61 Administration IP Network Parameters Administration via Local Phone --- Admin --- System --- SNMP |--- Traps enabled |--- Manager address |--- Manager port --- Community password A31003-S2010-M100-10-7619, 27/08/2008 3-23 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 62: Hipath Service Menu

    The phone’s local menu allows for controlling functions provided the HiPath system. For this purpose, the phone must be logged on at the system. For information on the available func- tions, see the phone’s user manual. Administration via Local Phone --- Service Menu A31003-S2010-M100-10-7619, 27/08/2008 3-24 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 63: System Settings

    HiPath 4000 resp. the "H.323 ID" in the HiPath 3000. The System type is provided by the system the phone is connected to and therefore read-only. Administration via WBM System > Gateway A31003-S2010-M100-10-7619, 27/08/2008 3-25 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 64 --- Admin --- System --- Gateway |--- System type |--- IP address |--- Gateway ID |--- Subscriber number --- Password --- Admin --- Network --- Port configuration --- Number --- Gatekeeper A31003-S2010-M100-10-7619, 27/08/2008 3-26 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 65: Hfa Emergency Gateway Settings

    --- System --- Standby gateway |--- System type |--- IP address |--- Gateway ID |--- Subscriber number --- Password --- Admin --- Network --- Port configuration --- Number --- Backup A31003-S2010-M100-10-7619, 27/08/2008 3-27 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 66: Server And Standby Server Ports

    |--- Server port configuration |--- H.225.0 port |--- CorNet-TC TLS port --- H.225.0 TLS port --- Standby server port configuration |--- H.225.0 port |--- CorNet-TC TLS port --- H.225.0 TLS port A31003-S2010-M100-10-7619, 27/08/2008 3-28 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 67: Redundancy

    Administration via Local Phone --- Admin --- System --- Redundancy |--- Small remote site |--- Auto switch back |--- Retry count main |--- Timeout main |--- Retry count standby --- Timeout standby A31003-S2010-M100-10-7619, 27/08/2008 3-29 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 68: Not Used Timeout

    The menu will close after the timeout, and the key will return to normal line key operation. The timeout ranges from 1 to 5 five minutes. The default value is 2. Administration via WBM System > Features > Configuration A31003-S2010-M100-10-7619, 27/08/2008 3-30 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 69: Pixel Saver (Openstage 40/60/80)

    The length of this timespan ranges from 2 hours to 8 hours. Administration via WBM Local functions > Pixel saver Administration via Local Phone --- Administration --- Local Functions --- Pixel saver --- Timeout (Hrs) A31003-S2010-M100-10-7619, 27/08/2008 3-31 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 70: Security

    Value range: true, false. • Certificate validation standby: Check the phone certificate against the gateway certifi- cate when the main gateway is in use. Value range: true, false. A31003-S2010-M100-10-7619, 27/08/2008 3-32 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 71 --- System |--- Secure H235 main |--- Secure H235 standby |--- Time H235 main |--- Time H235 standby |--- Signalling main |--- Signalling standby |--- Certificate main --- Certificate standby A31003-S2010-M100-10-7619, 27/08/2008 3-33 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 72: Dialing

    Emergency number: List of emergency numbers to be used for the phone. If there are more than one numbers, they must be separated by commas. The numbers entered here are not converted to canonical format. Maximum length: 50. (Optional) A31003-S2010-M100-10-7619, 27/08/2008 3-34 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 73 However, international numbers that use the + prefix will not be given access code. A31003-S2010-M100-10-7619, 27/08/2008 3-35 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 74 "+" prefix. • "Leave as +": All international formatted numbers will be prefixed with "+". Administration via WBM Locality > Canonical dial settings Local functions > Locality > Canonical dial A31003-S2010-M100-10-7619, 27/08/2008 3-36 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 75 |--- International access code |--- Operator code |--- Emergency number --- Admin --- Local Functions --- Locality --- Canonical dial |--- Internal numbers |--- External numbers |--- External access code --- International gateway A31003-S2010-M100-10-7619, 27/08/2008 3-37 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 76: Canonical Dial Lookup

    International code 1 ... 5: Sequence of "+", local country code, local area code, and local enterprise node corresponding to to one or more phone book entries. Example: "+4989722" for Siemens Munich. Administration via WBM Locality > Canonical dial lookup A31003-S2010-M100-10-7619, 27/08/2008 3-38 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 77 |--- Local code 2 |--- International code 2 |--- Local code 3 |--- International code 3 |--- Local code 4 |--- International code 4 |--- Local code 5 --- International code 5 A31003-S2010-M100-10-7619, 27/08/2008 3-39 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 78: Transferring Phone Software, Application And Media Files

    HTTPS base URL: IP address or hostname of the HTTPS server in use. If no port number is specified here, port 443 is used. Only applicable if Download method is switched to "HTTPS". A31003-S2010-M100-10-7619, 27/08/2008 3-40 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 79 Administration via Local Phone --- Admin --- File Transfer --- Defaults |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path --- HTTPS base URL A31003-S2010-M100-10-7619, 27/08/2008 3-41 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 80: Phone Software

    FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". A31003-S2010-M100-10-7619, 27/08/2008 3-42 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 81 --- File Transfer --- Phone app |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-S2010-M100-10-7619, 27/08/2008 3-43 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 82: Download/Update Phone Software

    In the administration menu, set the focus to Phone app. --- Admin --- File Transfer --- Phone app Press the key. A context menu opens. In the context menu, select Download. The download will start immediately. A31003-S2010-M100-10-7619, 27/08/2008 3-44 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 83: Picture Clips

    FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". A31003-S2010-M100-10-7619, 27/08/2008 3-45 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 84 --- File Transfer --- Picture Clip |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-S2010-M100-10-7619, 27/08/2008 3-46 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 85: Download Picture Clip

    In the administration menu, set the focus to Picture clip. --- Admin --- File Transfer --- Picture clip Press the key. A context menu opens. In the context menu, select Download. The download will start immediately. A31003-S2010-M100-10-7619, 27/08/2008 3-47 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 86: Ldap Template

    FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". A31003-S2010-M100-10-7619, 27/08/2008 3-48 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 87 --- File Transfer --- LDAP |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-S2010-M100-10-7619, 27/08/2008 3-49 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 88: Download Ldap Template

    In the administration menu, set the focus to LDAP. --- Admin --- File Transfer --- LDAP Press the key. A context menu opens. In the context menu, select Download. The download will start immediately. A31003-S2010-M100-10-7619, 27/08/2008 3-50 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 89: Logo

    Account: Account at the server (if applicable). • Username: User name for accessing the server. • Password: Password corresponding to the user name. • FTP path: Path of the directory containing the files. A31003-S2010-M100-10-7619, 27/08/2008 3-51 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 90 --- File Transfer --- Logo |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-S2010-M100-10-7619, 27/08/2008 3-52 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 91: Download Logo

    In the administration menu, set the focus to Logo. --- Admin --- File Transfer --- Logo Press the key. A context menu opens. In the context menu, select Download. The download will start immediately. A31003-S2010-M100-10-7619, 27/08/2008 3-53 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 92: Screensaver

    Server port: Port number of the FTP/HTTPS server in use. Default: 21. • Account: Account at the server (if applicable). • Username: User name for accessing the server. • Password: Password corresponding to the user name. A31003-S2010-M100-10-7619, 27/08/2008 3-54 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 93 --- File Transfer --- Screensaver |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-S2010-M100-10-7619, 27/08/2008 3-55 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 94: Download Screensaver

    In the administration menu, set the focus to Screensaver. --- Admin --- File Transfer --- Screensaver Press the key. A context menu opens. In the context menu, select Download. The download will start immediately. A31003-S2010-M100-10-7619, 27/08/2008 3-56 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 95: Ringer File

    If the default FTP/HTTPS access settings (see Section 3.7.2, “Common FTP Settings”) are to be used, Use default must be set to "Yes", and only the Filename must be specified. A31003-S2010-M100-10-7619, 27/08/2008 3-57 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 96 Download method is switched to "HTTPS". Administration via WBM File transfer > Ringer file Administration via Local Phone --- Admin --- File Transfer --- Ringer |--- Use default |--- Download method A31003-S2010-M100-10-7619, 27/08/2008 3-58 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 97 Administration Transferring Phone Software, Application and Media Files |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-S2010-M100-10-7619, 27/08/2008 3-59 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 98: Download Ringer File

    In the administration menu, set the focus to Ringer. --- Admin --- File Transfer --- Ringer Press the key. A context menu opens. In the context menu, select Download. The download will start immediately. A31003-S2010-M100-10-7619, 27/08/2008 3-60 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 99: Hpt Dongle Key

    HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". Administration via WBM File transfer > HPT dongle A31003-S2010-M100-10-7619, 27/08/2008 3-61 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 100 |--- Use default |--- Download method |--- FTP Server |--- FTP Port |--- FTP Account |--- FTP Username |--- FTP Password |--- FTP path |--- HTTPS base URL --- Filename A31003-S2010-M100-10-7619, 27/08/2008 3-62 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 101: Download Ringer File

    In the administration menu, set the focus to HPT Dongle. --- Administration --- File Transfer --- HPT Dongle Press the key. A context menu opens. In the context menu, select Download. The down- load will start immediately. A31003-S2010-M100-10-7619, 27/08/2008 3-63 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 102: Corporate Phonebook: Directory Settings

    Default: "Anonymous". • User name: User name used for authentication with the LDAP server in the LDAP bind re- quest. • Password: Password used for authentication with the LDAP server. A31003-S2010-M100-10-7619, 27/08/2008 3-64 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 103 Administration via Local Phone --- Administration --- Local Functions --- Directory Settings |--- LDAP server address |--- LDAP server port |--- LDAP authentication |--- LDAP user name --- LDAP password A31003-S2010-M100-10-7619, 27/08/2008 3-65 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 104: Speech

    The number of the port used for RTCP will be the RTP port number increased by 1. Administration via WBM Network > Port Configuration Administration via Local Phone --- Admin --- Network --- Port Configuration --- Number --- RTP base A31003-S2010-M100-10-7619, 27/08/2008 3-66 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 105: Codec Preferences

    Default: "Choice 2". • G.729: Parameters for the G. 729 codec. Value Range: "Choice 1", "Choice 2", "Choice 3", "Disable", "Enabled". Default: "Choice 3". Administration via WBM Speech > Codec preferences A31003-S2010-M100-10-7619, 27/08/2008 3-67 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 106 Administration Speech Administration via Local Phone --- Admin --- Speech --- Codec Preferences |--- Silence suppression |--- Packet size |--- G.711 |--- G.729 --- G.722 A31003-S2010-M100-10-7619, 27/08/2008 3-68 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 107: Audio Settings

    Both microphone and loudspeaker can be switched on or off separately. Administration via WBM Speech > Audio Settings Administration via Local Phone --- Admin --- Speech --- Audio Settings |--- Disable microphone --- Disable loudspeech A31003-S2010-M100-10-7619, 27/08/2008 3-69 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 108: Display General Phone Information

    Last restart: Shows date and time of the last reboot. Display on the WBM General information Display on the Local Phone --- Admin --- General Information |--- MAC address |--- Software version --- Last restart A31003-S2010-M100-10-7619, 27/08/2008 3-70 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 109: Password

    Administration via WBM Security > Change Admin password Security > Change User password Administration via Local Phone --- Admin --- Password |--- Admin |--- Confirm admin |--- User --- Confirm user A31003-S2010-M100-10-7619, 27/08/2008 3-71 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 110: Troubleshooting: Lost Password

    Press the number keys 2-8-9 simultaneously. The factory reset menu opens. In the input field, enter the special password for factory reset: "124816". Confirm by pressing A31003-S2010-M100-10-7619, 27/08/2008 3-72 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 111: Restart Phone

    Administration Restart Phone 3.13 Restart Phone If necessary, the phone can be restarted from the administration menu. Administration via WBM Administration via Local Phone --- Admin --- Restart A31003-S2010-M100-10-7619, 27/08/2008 3-73 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 112: Factory Reset

    This function resets all parameters to their factory settings. A special reset password is required for this operation. Administration via WBM Maintenance > Factory reset Administration via Local Phone --- Admin --- Factory reset A31003-S2010-M100-10-7619, 27/08/2008 3-74 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 113: Test Interface

    Administration Test Interface 3.15 Test Interface This parameters enables or disables the test interface. Administration via WBM Maintenance > Test interface A31003-S2010-M100-10-7619, 27/08/2008 3-75 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 114: Diagnostics

    This is where applications to be run on the phone can be started and stopped. • Call log This deals with the Call log application which displays the call history of the phone. • Certificate management A31003-S2010-M100-10-7619, 27/08/2008 3-76 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 115 This keeps a record of all services which are currently running inside the phone. • Tone generation service This service handles the generation of the tones and ringers on the phone. A31003-S2010-M100-10-7619, 27/08/2008 3-77 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 116 It is also involved in the switching of audio devices such as the handset and loudspeaker. • OBEX service This is involved with Bluetooth accesses to the phone. Bluetooth is available only on OpenStage 60/80 phones. • Phonebook A31003-S2010-M100-10-7619, 27/08/2008 3-78 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 117 This provides a switching mechanism for voice streams within the phone. It is also involved in QDC, Music on hold and voice instrumentation. • Web Server service This provides the web access to the phone. A31003-S2010-M100-10-7619, 27/08/2008 3-79 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 118 Administration Diagnostics Administration via WBM Diagnostics > Fault Trace Configuration A31003-S2010-M100-10-7619, 27/08/2008 3-80 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 119: Easy Trace Profiles

    Special EasyTrace profiles enable setting one level for all parameters with just one click (see Section 3.16.2.1, “No Tracing for All Services”). The following sections describe the Easy Trace profiles available for the phone. A31003-S2010-M100-10-7619, 27/08/2008 3-81 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 120: No Tracing For All Services

    Administration Diagnostics 3.16.2.1 No Tracing for All Services Diagnostics > Easy Trace Profiles > All OFF 3.16.2.2 Bluetooth Handsfree Diagnostics > Easy Trace Profiles > Bluetooth handsfree profile A31003-S2010-M100-10-7619, 27/08/2008 3-82 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 121: Bluetooth Headset

    Diagnostics > Easy Trace Profiles > Bluetooth headset profile 3.16.2.4 Call Connection Diagnostics > Easy Trace Profiles > Call connection 3.16.2.5 Call Log Diagnostics > Easy Trace Profiles > Call log problems A31003-S2010-M100-10-7619, 27/08/2008 3-83 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 122: Ldap Phonebook

    Diagnostics > Easy Trace Profiles > Phonebook (LDAP) problems 3.16.2.7 DAS Connection Diagnostics > Easy Trace Profiles > DAS connection 3.16.2.8 DLS Data Errors Diagnostics > Easy Trace Profiles > DLS data errors A31003-S2010-M100-10-7619, 27/08/2008 3-84 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 123: Help Application

    Diagnostics > Easy Trace Profiles > 802.1x problems 3.16.2.10 Help Application Diagnostics > Easy Trace Profiles > Help application problems 3.16.2.11 Sidecar Diagnostics > Easy Trace Profiles > Sidecar problems A31003-S2010-M100-10-7619, 27/08/2008 3-85 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 124: Key Input

    Diagnostics > Easy Trace Profiles > Key input problems 3.16.2.13 LAN Connectivity Diagnostics > Easy Trace Profiles > LAN connectivity problems 3.16.2.14 Local Phonebook Diagnostics > Easy Trace Profiles > Phonebook (local) problems A31003-S2010-M100-10-7619, 27/08/2008 3-86 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 125: Messaging

    Diagnostics > Easy Trace Profiles > Messaging application problems 3.16.2.16 Mobility Diagnostics > Easy Trace Profiles > Mobility problems 3.16.2.17 Phone administration Diagnostics > Easy Trace Profiles > Phone administration problems A31003-S2010-M100-10-7619, 27/08/2008 3-87 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 126: Server Based Applications

    Diagnostics > Easy Trace Profiles > Tone problems 3.16.2.21 USB Backup/Restore Diagnostics > Easy Trace Profiles > USB backup/restore 3.16.2.22 Voice Dialling Diagnostics > Easy Trace Profiles > Voice recognition problems A31003-S2010-M100-10-7619, 27/08/2008 3-88 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 127: Web Based Management

    Administration Diagnostics 3.16.2.23 Web Based Management Diagnostics > Easy Trace Profiles > EasyTrace: Web based management A31003-S2010-M100-10-7619, 27/08/2008 3-89 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 128: Qos Reports

    Average round trip delay (milliseconds): When the average round trip time exceeds this value, a report is generated. Default: 100. Non-compressing codecs: The following threshold values apply to non-compressing codecs. A31003-S2010-M100-10-7619, 27/08/2008 3-90 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 129 Default: 8. General: • Resend last report: If checked, the previous report is sent once again on pressing Sub- mit. By default, this is unchecked. A31003-S2010-M100-10-7619, 27/08/2008 3-91 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 130 |--- Max jitter |--- Round-trip delay |--- Non-compressing: |--- Lost packets (K) |--- Lost consecutive |--- Good consecutive |--- Compressing: |--- Lost packets (K) |--- Lost consecutive --- Good consecutive A31003-S2010-M100-10-7619, 27/08/2008 3-92 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 131: Ping

    In the Diagnostics > Miscellaneous dialog, enter the host’s IP address or hostname into the in- put field and press Ping. The result will be reported underneath the input field. A31003-S2010-M100-10-7619, 27/08/2008 3-93 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 132: Memory Status Information

    Administration Diagnostics 3.16.5 Memory Status Information The OpenStage phone offers detailed information on the current consumption of memory. Display on the WBM Diagnostics > Miscellaneous A31003-S2010-M100-10-7619, 27/08/2008 3-94 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 133: Core Dump

    If Delete core dump is activated, the current core dump file is deleted on Submit. By default, this is not activated. If one or more core dump file exist, hyperlinks for downloading will be created automatically. Administration via WBM Diagnostics > Miscellaneous > Core dump A31003-S2010-M100-10-7619, 27/08/2008 3-95 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 134: Bluetooth

    The Bluetooth interface can be enabled or disabled here. By default, it is enabled. Bluetooth is available only on OpenStage 60/80 phones. > Administration via WBM Administration via Local Phone --- Admin --- Bluetooth --- Enable A31003-S2010-M100-10-7619, 27/08/2008 3-96 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 135: Examples And Howtos

    Set of numbers to access emergency ser- vices. Initial extension digits 2, 3, 4, 5, 6, 8 digits of numbers that are used for extensi- on numbers on the local node. Table 4-1 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 136: Canonical Dial Lookup

    International code <2> +4989722 Equivalent prefix to access numbers on this node from the PSTN. Here, the prefix used by the PSTN for direct inward dialing is identical to the enterprise node prefix. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 137: Conversion Examples

    Dial string sent when Internal numbers = Local enterprise form 2345 dialing from the Internal numbers = Always add node 7802345 phone book Internal numbers = Use external numbers 9432345 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 138 Dial string sent when External numbers = Local public form 234567 dialing from the External numbers = National public form 011511234567 phone book External numbers = International form 004411511234567 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 139: How To Create Logo Files For Openstage Phones

    Adobe Photoshop Example: Save the Image Finally, save the image in BMP format. You can now upload the logo file to the phone as described in Abschnitt 3.7.6, “Logo”. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 140: For Openstage 60/80

    The background color on WP4 - skin 1 is a gradient; the colour listed here is an average value. Adobe Photoshop: Click on the Background Color icon on the Color palette group, then type the color code without leading "#" into the # field) A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 141 Merge the two layers to one. Adobe Photoshop: In the Panel, select both the background layer and the new layer containing the inserted logo. Afterwards, go to Layer in the Menu bar, and select Merge Layers. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 142 Magic Eraser Tool. After this, got to the Menu bar and set the Tolerance field to "0". Save the Image Finally, save the image in PNG format. You can now upload the logo file to the phone as de- scribed in Abschnitt 3.7.6, “Logo” A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 143: How To Set Up The Corporate Phonebook (Ldap)

    OpenStage phones. To enable dialing internal numbers from the corporate phonebook, an LDAP entry must be provided that contains the proper number format required by the HiPath system. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 144: Create An Ldap Template

    In the LDAP template, the fields are represented by hard-coded names: ATTRIB01, ATTRIB02, and so on. These field names are assigned to LDAP attributes, as appropriate. A31003-S2010-M100-10-7619, 27/08/2008 4-10 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 145 Given "example.com" as the LDAP subtree to be searched, the LDAP template file would look like this: OpenStage LDAP TEMPLATE (v.1) SEARCHBASE="dc=example,dc=com" ATTRIB01="sn" ATTRIB02="givenname" ATTRIB03="telephoneNumber" ATTRIB04="facsimileTelephoneNumber" ATTRIB05="mobile" ATTRIB06="homePhone" ATTRIB07="o" ATTRIB08="departmentNumber" ATTRIB09="" ATTRIB10="title" ATTRIB11="mail" A31003-S2010-M100-10-7619, 27/08/2008 4-11 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 146 Given "example.com" as the LDAP subtree to be searched, the LDAP template file would look like this: OpenStage LDAP TEMPLATE (v.1) SEARCHBASE="dc=example,dc=com" ATTRIB01="sn" ATTRIB02="givenname" ATTRIB03="ipPhone" ATTRIB04="otherTelephone" ATTRIB05="mobile" ATTRIB06="homePhone" ATTRIB07="company" ATTRIB08="department" ATTRIB09="" ATTRIB10="title" ATTRIB11="mail" A31003-S2010-M100-10-7619, 27/08/2008 4-12 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 147: Load The Ldap Template Into The Phone

    Upload the file using the WBM (see Abschnitt 3.7.5, “LDAP Template”), or, alternatively, the Local menu, or the DLS (see the Deployment Service Administration Manual). For an ex- ample configuration, see the following WBM screenshot (path: File transfer > LDAP): A31003-S2010-M100-10-7619, 27/08/2008 4-13 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 148: Configure Ldap Access

    TouchGuide. In the context menu, select Find by pressing In the query mask, select the entry to be searched, for instance Last Name. Press open the onscreen keypad for text input. A31003-S2010-M100-10-7619, 27/08/2008 4-14 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 149 3.1, “Access via Local Phone”, step 5. Navigate to the Find option and press . If the query was successful, at least one entry will be listed in the following manner: A31003-S2010-M100-10-7619, 27/08/2008 4-15 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 150 Dial the Business 1 number. • Dial the Mobile number. • Have the entry’s details, that is, all attributes displayed. • Start a new search. • Clear the list of search results. A31003-S2010-M100-10-7619, 27/08/2008 4-16 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 151: Technical Reference

    Update Service (DLS) Port configuration System Gateway Standby gateway Redundancy SNMP Features Configuration Security File transfer Defaults Phone application Picture Clip LDAP Logo Screensaver 1. OpenStage 60/80 only. 2. OpenStage 40/60/80 only. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 152 Fault trace configuration EasyTrace Profiles Bluetooth handsfree profile Bluetooth headset profile Call connection Call log problems DAS connection DLS data errors Help application problems Key input problems LAN connectivity problems Messaging application issues A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 153 Web based management 802.1x problems Clear all profiles QoS reports Generation View Session Data Miscellaneous IP tests Memory information Core dump Maintenance Remote trace Restart Phone Factory reset HPT interface Secure shell A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 154: Web Pages

    Technical Reference Menus 5.1.1.2 Web Pages Admin Login Bluetooth IP configuration Update Service (DLS) A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 155 Technical Reference Menus Port configuration Gateway A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 156 Technical Reference Menus Standby gateway Redundancy SNMP A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 157 Technical Reference Menus Configuration Security Defaults Phone application A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 158 Technical Reference Menus Picture Clip LDAP Logo A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 159 Technical Reference Menus Screensaver Ringer file Dongle Key A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 160 Technical Reference Menus Directory settings Canonical dial settings Canonical dial lookup Canonical dial A31003-S2010-M100-10-7619, 27/08/2008 5-10 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 161 Technical Reference Menus Pixel saver Date and Time Codec preferences General information A31003-S2010-M100-10-7619, 27/08/2008 5-11 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 162 Technical Reference Menus Change Admin password Change User password Change mobility password A31003-S2010-M100-10-7619, 27/08/2008 5-12 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 163 Technical Reference Menus Fault trace configuration Bluetooth handsfree profile A31003-S2010-M100-10-7619, 27/08/2008 5-13 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 164 Technical Reference Menus Bluetooth headset profile Call connection Call log problems DAS connection A31003-S2010-M100-10-7619, 27/08/2008 5-14 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 165 Technical Reference Menus DLS data errors Help application problems Sidecar problems Key input problems LAN connectivity problems A31003-S2010-M100-10-7619, 27/08/2008 5-15 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 166 Technical Reference Menus Messaging application issues Mobility problems Phone administration problems Phonebook (LDAP) problems A31003-S2010-M100-10-7619, 27/08/2008 5-16 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 167 Technical Reference Menus Phonebook (local) problems Server based application problems Speech problems Tone problems USB backup/restore A31003-S2010-M100-10-7619, 27/08/2008 5-17 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 168 Technical Reference Menus Voice recognition problems Web based management 802.1x problems A31003-S2010-M100-10-7619, 27/08/2008 5-18 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 169 Technical Reference Menus Clear all profiles Generation View Session Data A31003-S2010-M100-10-7619, 27/08/2008 5-19 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 170 Technical Reference Menus IP tests Memory information Core dump Remote trace A31003-S2010-M100-10-7619, 27/08/2008 5-20 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 171 Technical Reference Menus Restart Phone Factory reset HPT interface Secure shell A31003-S2010-M100-10-7619, 27/08/2008 5-21 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 172: Local Phone Menu

    |--- Send Now -> Section 3.16.3 --- Thresholds |--- Maximum jitter -> Section 3.16.3 |--- Round-trip delay -> Section 3.16.3 |--- Non-compressing -> Section 3.16.3 |--- ...Lost packets (K) -> Section 3.16.3 A31003-S2010-M100-10-7619, 27/08/2008 5-22 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 173 |--- TC TEST expiry |--- SNMP |--- Traps enabled -> Section 3.3.8 |--- Manager address -> Section 3.3.8 |--- Manager port -> Section 3.3.8 --- Community password -> Section 3.3.8 A31003-S2010-M100-10-7619, 27/08/2008 5-23 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 174 |--- Password -> Section 3.7.4.1 |--- FTP path -> Section 3.7.4.1 |--- HTTPS base URL -> Section 3.7.4.1 --- Filename -> Section 3.7.4.1 |--- LDAP |--- Use default -> Section 3.7.5.1 A31003-S2010-M100-10-7619, 27/08/2008 5-24 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 175 |--- Server address -> Section 3.8.1 |--- Server port -> Section 3.8.1 |--- Authentication -> Section 3.8.1 |--- User name -> Section 3.8.1 --- Password -> Section 3.8.1 |--- Locality A31003-S2010-M100-10-7619, 27/08/2008 5-25 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 176 --- Dial plan status |--- Password |--- Admin -> Section 3.11 |--- Confirm admin -> Section 3.11 |--- User -> Section 3.11 |--- Confirm user -> Section 3.11 |--- Mobility A31003-S2010-M100-10-7619, 27/08/2008 5-26 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 177 |--- Mobility feature |--- Managed profile |--- Error count local --- Error count remote |--- Factory reset -> Section 3.14 --- Restart -> Section 3.13 OpenStage 60/80 only. OpenStage 40/60/80 only. A31003-S2010-M100-10-7619, 27/08/2008 5-27 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 178: Troubleshooting: Error Messages

    Unable to register HFA Logon: No port avail- main line able No Telephony possible Unable to register HFA Logon: Rejected due to main line mobile terminal blokked Table 5-1 Error Messages A31003-S2010-M100-10-7619, 27/08/2008 5-28 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 179 No Telephony possible Unable to register HFA Logoff: Client not main line logged on No Telephony possible Unable to register HFA Logoff: Client logged off main line Table 5-1 Error Messages A31003-S2010-M100-10-7619, 27/08/2008 5-29 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 180 To PC connection No Telephony possible Unable to establish a TLS No SNTP server connection Reduced Telephony func- Unable to contact the DLS tions for mobility logon Table 5-1 Error Messages A31003-S2010-M100-10-7619, 27/08/2008 5-30 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 181: Glossary

    IP Phones and IP Clients, in both HiPath- and non-HiPath networks. Domain Name System. Performs the translation of network domain names and computer hostnames to ->IP addresses. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 182 Gateway Mediation components between two different network types, e. g., ->IP network and ISDN network. HTTP Hypertext Transfer Protocol. A standard protocol for data transfer in ->IP networks. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 183 Light Emitting Diode. Cold light illumination in different colours at low power consumption. MAC Address Media Access Control address. Unique 48-bit identifier attached to network adapters. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 184 The OpenStage phone allows for the setting of QoS parameters on layer 2 and layer 3 (DiffServ). A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 185 Network device that connects multiple network segments and terminal devices. The for- warding of data packets is based on ->MAC Addresses: data targeted to a specific device is directed to the switch port that device is attached to. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 186 ->IP-based network Wireless Application Protocol. A collection of protocols and technologies aiming at en- abling access to internet applications for wireless devices. WAP can also be used by the OpenStage phone. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 187 ->WAP-browser. Wireless Session Protocol. The protocol is a part of the ->WAP specification. Its task is to establish a session between the terminal device and the WAP gateway. A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 188 Glossary Nur für den internen Gebrauch A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 189: Index

    MDI-X 3-5, 6-4 Function Keys 1-3, 1-4, 1-5 MIB 6-4 MWI (Message Waiting Indicator) 6-4 Graphics Display 1-3, 1-4 National Prefix (Trunk Prefix) 3-34 Handset 1-3, 1-4, 1-5 Operator Code 3-34 A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 190 Subnet Mask (Manual configuration) 3-15 TCP 6-6 TLS 6-6 TouchGuide 1-3, 1-4, 1-5 TouchSlider 1-3 UDP 6-6 Vendor Class (DHCP) 2-8, 2-16 VLAN 2-8, 3-7 WBM (Web Based Management) 1-5, 2-7, 6- A31003-S2010-M100-10-7619, 27/08/2008 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual...
  • Page 192 Subject to availability. Right of modificati- Siemens Enterprise Communications on reserved. The trademarks used are owned by www.siemens.com/open Siemens Enterprise Communications GmbH & Co. KG or their respective owners.