Siemens HiPath 5000 Service Manual page 1098

fcodes.fm
Codes for Activating/Deactivating Features
Table B-1 Codes for Activating/Deactivating Features
TDM workpoint
clients without
display,
CMI mobile
phones,
analog work-
point clients
Feature
Change tele- *93+Old
phone lock ac- code+2 x New
cess code code
Reset servic- #0
es/features for
own workpoint
client
Speaker calls *80+Stn. no.
Hands free an- –
swerback on
Hands free an- –
swerback off
Abbreviations:
●
Call states: RH = idle, BR = ready, WA = digit input, BS = busy, RK = incoming call, RG = outgoing call, GS = call
●
Key programming: V = key can be programmed with complete feature, U = key can be programmed to start procedure, T = key with
toggle functionality
●
Menu level: H = Main menu, U1 = 1st submenu, U2 = 2nd submenu
B-8
Operating procedure for
TDM workpoint clients with
S work- display,
0
point cli- CMI feature mobile phones,
ents IP workpoint clients,
optiClient 130 V5.0 phone
1
Key
7593... *93... –
760 #0 –
7580 *80 – V, U
– *96 – V, T
– #96 – V, T
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
optiCli-
optiCli-
ent 130
ent 130
V5.0
easy-
office
Com
Menu
– – H Local
feature feature
menu
– – H –
ture key
– H Menu
ture key
RH U1 –
RH U1 –
Sup-
ported
Locking of
work-
feature
V5.0
point
clients
(see
abbre-
via-
tions
in
Table
B-1)
Local AN, X RK,
DIG, BS
menu ENT,
S0,
CMI,
IPSC
Fea- AN, x RK,
DIG, BS
ENT,
S0,
CMI,
IPSC
Fea- AN, – RK,
DIG, BS.
ENT, WA,
S0, RG
CMI,
IPSC
– DIG, X –
CMI,
IPSC
– DIG, X –
CMI,
IPSC
P31003-H3560-S403-54-7620, 09/05
Note
See feature de-
scription: Reset
activated features
Speaker calls to a
group: Paging only
possible if "Speak-
er call" has been
enabled for the
called party. The
called party's mi-
crophone is acti-
vated if "Direct An-
swering" has been
enabled for this
party (not for pag-
ing).
Only for WpC with
speakerphone
Only for WpC with
speakerphone