Issuing And Saving Log Data - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:
Table of Contents

Advertisement

12.6.2.2

Issuing and Saving Log Data

Data is automatically logged in an area (LOG area) on the MMC reserved for this purpose (Hi-
Path 3000) or in a special directory (HiPath 5000). It cannot be switched off.
If approximately 80 % of the MMC log area capacity is exceeded, a Class A error is issued. This
error is dealt with like all Class A errors and is displayed on the optiPoint Attendant as "Revisor
Alarm."
The log should now be read out and archived, meaning it should be saved in an archive file (file
extension = arc). If an archive is not created, the oldest datablock is overwritten if there is a dan-
ger of overflow.
You can only issue log entries using HiPath 3000 Manager E. You cannot retrieve the log entries
from the system until you have logged on as a user with "Revisor" rights.
Archive
If you request an archive (storage), the system checks whether or not there is already an ar-
chive file (file extension = arc). If it is a file with log data from a previous archive, the file must
match the current customer. In case of a positive result, the system log entries are retrieved
and attached to the existing data in the archive file. At the same time, the data in the system is
deleted.
If malfunctions occur during this procedure (for example, line interruption), the entire procedure
ends and the archive has to be restarted.
If no archive is requested, the revisor can retrieve, view, and print the log entries. However, log
entries remain in the system.
You do not have to log on to the system to use the HiPath 3000 Manager E to check archive
files on the PC monitor. In this case, a password is not required.
Multimedia card
When replacing the multimedia card, the following applies:
If the memory area for logging data is empty, logging restarts.
If the memory area for logging data is not empty, logging continues.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
service.fm
Service
Security Features
12-89

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 3000Hipath 3800

Table of Contents