Possible Add-On Device Configurations - Siemens HiPath 5000 Service Manual

wclient.fm
Workpoint Clients
optiPoint 500
An external power supply unit is always required to operate the optiPoint application module.
The power supply units for optiPoint 410 and optiPoint 420 described in Section 10.7.1.2 are
used. If you already have this type of power supply unit, the second output can be used to pow-
er the optiPoint application module.
10.2.2.4

Possible add-on device configurations

The following table shows the possible configurations for add-on devices on telephones from
the optiPoint 500 family (not optiPoint 500 entry and optiPoint 500 economy).
Table 10-1 Add-on device configurations on an optiPoint 500 telephone
optiPoint 500 telephone
optiPoint 500 basic
optiPoint 500 standard,
optiPoint 500 standard SL
(For U.S. Only)
optiPoint 500 advance
1 Configuration with two optiPoint BLFs only with HiPath 3800, HiPath 3750, and HiPath 3700
10-20
1st add-on device
optiPoint key module
optiPoint key module
optiPoint key module
optiPoint application module
optiPoint application module
optiPoint application module
optiPoint BLF
optiPoint BLF
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
2nd add-on device
–
optiPoint key module
optiPoint BLF
–
optiPoint key module
optiPoint BLF
–
1
optiPoint BLF
P31003-H3560-S403-54-7620, 09/05