Siemens HiPath 5000 Service Manual page 562

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3800
Table 4-9 Visual Inspection Procedure
Step Activity
6. Check whether a separate
grounding is connected to
the main grounding termi-
nals of all system cabinets.
7. Check the local supply volt-
age.
8. Only for installing HiPath
3800 as a standalone sys-
tem:
close all system cabinets
with the front and back plas-
tic covers provided.
After finishing the visual inspection, you can begin starting up the HiPath 3800 as
>
described in Chapter 5.
4-84
Resources/
Remarks
If necessary, ground the system as
described in the following sections:
●
●
Digital multime-
ter
Fit the cover into the guides and press
down on the cover unit it snaps into
place.
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Action
Section 4.2.3.4, for installing the
standalone HiPath 3800
Section 4.2.4.4, for installing the
HiPath 3800 in the 19-inch cabi-
net.
P31003-H3560-S403-54-7620, 09/05