Table of Contents
Advertisement
Getting Started
Step by Step
M a i n
M e n u
5 . S e t u p
S e t u p
2 . N e t w o r k
E n t e r
P a s s w o r d :
* * * * * *
1 . M o d e
D H C P
1 . M o d e
S t a t i c
I P
10
Startup
In the event of problems with initial startup or if you
have specific questions, please refer to the following
chapters for support:
•
for technical information on administration
•
for a description of error messages
If There is No DHCP Server Available
If a DHCP server is already available, go to
If there is no DHCP server available, you must deacti-
vate the DHCP function and enter the data for operation
with static IP addresses by hand.
Deactivating the DHCP function
Press this key.
Use
to confirm it.
Use
S e t .
to confirm it.
Enter the administration password (default: 123456)
and press
The current DHCP setting is indicated.
Press
The startup procedure shown here describes a
standard configuration scenario. Additional en-
tries may be needed for different network config-
urations.
page 41.
to scroll to the function displayed and press
to scroll to the function displayed and press
to confirm it.
to deactivate DHCP .
page 59.
page 12.
Advertisement
Table of Contents
