Remove Alternator Bracket; Remove Exhaust Manifold - Toyota MR2 1988 Repair Manual

EM-60 ENGINE MECHANICAL - Cylinder Head (4A-GZE)
EM4593
EM4618
32. REMOVE FRONT EXHAUST PIPE
(See page LU-4)
33. (w/ A/C)
REMOVE A/C COMPRESSOR AND BRACKET
34. REMOVE DISTRIBUTOR
(See page IG-9)
35. REMOVE ALTERNATOR
(See page CH-7)
36. REMOVE ALTERNATOR BRACKET
(a) Disconnect the oil cooler pipe.
(b)
Remove the three bolts, nut and alternator bracket.
37. REMOVE EXHAUST MANIFOLD
(a) Remove the six bolts and upper heat insulator.
(b) Remove the bolt, nut and manifold stay.
(c) Remove the three bolts, two nuts exhaust manifold
and gasket.
38. REMOVE CAMSHAFT AND CYLINDER HEAD
(See steps 29 to 43 on pages EM-30 to 33)