Change Cutter - SATO CL4NX Operator's Manual

Change Printhead
System > Notifications > Change Printhead > Change Printhead
Set whether or not to enable the notification function about the replace-
ment timing of the print head.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.
Printhead Interval
System > Notifications > Change Printhead > Printhead Interval
Set the notification interval about the replacement timing of the print head.
Available to change if you have selected Enabled in Change Printhead
menu.
The printer shows the print distance as the setting value.
The setting range is 0 to 999 km.
Note:
You can disable the notification function if you set to 0.

Change Cutter

System > Notifications > Change Cutter
Notify the replacement timing of the cutter unit.
The setting items are as follows:
1 Change Cutter
2 Cutter Life
3 Cutter Count
Set whether or not to enable the notification
function about the replacement timing of the
cutter unit.
Set the notification interval about the replace-
ment timing of the cutter unit.
Shows the current count the cutter has cut.
4 Operation and Configuration
CL4NX Operator Manual
143