SATO CL4NX Operator's Manual page 84

4 Operation and Configuration
Start Online
Printing > Advanced > Start Online
Set the status when the printer is power on.
The options are as follows:
• Enabled: The printer powers on in online mode.
• Disabled: The printer powers on in offline mode.
Feed After Error
Printing > Advanced > Feed After Error
Feeds the media automatically when recovering from an error and chang-
ing to online mode.
The options are as follows:
• Enabled: Feed the media when changing to online mode after recover-
ing from a head open error.
• Disabled: Do not feed the media when changing to online mode after
recovering from a head open error.
Feed At Power On
Printing > Advanced > Feed At Power On
Feeds the media automatically when the printer is power on.
The options are as follows:
• Enabled: Feeds the media when the printer is power on.
• Disabled: Does not feed the media when the printer is power on.
Max Feed
Printing > Advanced > Max Feed
Set the media feed amount for Tear-off, cut and dispense stop.
Set the media feed amount based on the print head position that is 0.
The actual media feed amount is the value of Offset + Max Feed.
The setting range is as follows:
The setting range varies depending on the print resolution of the printer.
• 203 dpi: 0 to 2040 dots
• 305 dpi: 0 to 3060 dots
• 609 dpi: 0 to 6120 dots
82
CL4NX Operator Manual