SATO CL4NX Operator's Manual page 76

4 Operation and Configuration
Horizontal
Printing > Imaging > Horizontal
Set the print position in the horizontal direction.
Set the offset value from the print reference position with '+' to move to the
left side, and with '-' to move to the right side of the printer (when facing the
front of the printer).
The setting range is -792 to +792 dots.
Advanced
Printing > Advanced
Set the sensor operation and print motion in detail.
The setting items are as follows:
1 Calibrate
2 Head Check
3
Head Check Mode
4
Every Page
5 Check Media Size
6 Adjustments
7 Start Online
8 Feed After Error
9 Feed At Power On
10
Max Feed
11
Paper End
12 Head Base Position
13 Priority Setting
74
CL4NX Operator Manual
Do the adjustment of the media sensor.
Check if there is a filament disconnection of the
print head.
Set the mode for head check.
*Shows if you have selected All or Barcode in
Head Check menu.
Set the interval for head check.
*Shows if you have selected Every Page in
Head Check Mode menu.
Set whether or not to enable media size check.
Correct the offset, print position and print dark-
ness.
Set the status when the printer is power on.
Feeds the media when error occurs.
Feeds the media automatically when the printer
is power on.
Set the length to feed after printing.
Set the media type for sensing paper end.
Set the edge position for printing.
Select the prioritized setting.