SATO CL4NX Operator's Manual page 117

IEEE1284
Interface > IEEE1284
Set the IEEE1284 connection.
The setting items are as follows:
1 Ack-width
2 Plug'n'Play
3 Flow Control
4 BCC
Caution:
After setting, power on the printer again to enable the new setting.
Ack-width
Interface > IEEE1284 > Ack-width
Set the ACK timing.
The setting range is 0.5 to 12 microseconds.
Plug'n'Play
Interface > IEEE1284 > Plug'n'Play
Set whether or not to enable the Plug'n'Play.
The options are as follows:
• Enabled: Enable the Plug'n'Play function.
• Disabled: Disable the Plug'n'Play function.
Set the ACK timing.
Set the Plug'n'Play.
Set the communication protocol.
Set the BCC check function.
*Shows if you have selected Status5 in Flow
Control menu.
4 Operation and Configuration
CL4NX Operator Manual
115