SATO CL4NX Operator's Manual page 157

Remove
Tools > HEX-Dump > Log Files > Remove
Delete the log files of the printer.
The procedures to delete the log files are as follows:
1. Select the file type to delete.
• buff/: the buffer data saved after you do the Buffer Dump.
• hexdump/: the received data created through Hex Dump Mode.
2. Select the file to delete and press the
the right side of the file name.
3. After you select the file, press the right soft button to delete the
selected file.
Print
Tools > HEX-Dump > Log Files > Print
Do a dump print of the log files of the printer.
The procedures to print the log files are as follows:
1. Select the file type to print.
• buff/: the buffer data saved after you do the Buffer Dump.
• hexdump/: the received data created through Hex Dump Mode.
2. Select the file to print and press the
to do the dump print.
Reset
Tools > Reset
The setting items are as follows:
1 Settings
button. A tick mark shows on
button or the right soft button
Select the setting items to initialize.
4 Operation and Configuration
CL4NX Operator Manual
155