SATO CL4NX Operator's Manual page 111

Traps
Interface > Network > Services > SNMP > Traps
Set the Traps function.
The setting items are as follows:
1 Enable
2 SNMP Version
3 IP Version
4 Destinations
5 Destination 1
6 Destination 2
7 Destination 3
8 Community
9 User
10 Engine ID
11 Security
12 Authentication
Protocol
13 Authentication
Passphrase
14 Privacy Protocol
15 Privacy Pass-
phrase
Use the Traps function.
Set the version of SNMP.
Set the version of IP.
Set the number of Traps Destinations.
Set the address of Traps Destinations.
Set the address of Traps Destinations.
*Shows if you have selected 2 or 3 in Destina-
tion menu.
Set the address of Traps Destinations.
*Shows if you have selected 3 in Destination
menu.
Set the community name of Traps.
*Shows if you have selected 1 or 2c in SNMP
Version menu.
Set the user name of Traps.
*Shows if you have selected 3 in SNMP Ver-
sion menu.
Set the engine ID.
*Shows if you have selected 3 in SNMP Ver-
sion menu.
Set the security level.
*Shows if you have selected 3 in SNMP Ver-
sion menu.
Set the authentication protocol.
*Shows if you have selected Authentication or
Privacy in Security menu.
Set the authentication passphrase.
*Shows if you have selected Authentication or
Privacy in Security menu.
Set the authentication privacy protocol.
*Shows if you have selected Privacy in Secu-
rity menu.
Set the authentication privacy passphrase.
*Shows if you have selected Privacy in Secu-
rity menu.
4 Operation and Configuration
CL4NX Operator Manual
109