SATO CL4NX Operator's Manual page 93

Wi-Fi Protected Setup
Interface > Network > Settings > Wi-Fi > Wi-Fi Protected Setup
Set the wireless LAN connection with push button method or PIN code
method.
The setting items are as follows:
1 Button (PBC)
2 PIN
Note:
Refer to the manual of access point for its operation.
Button (PBC)
Interface > Network > Settings > Wi-Fi > Wi-Fi Protected Setup> Button
(PBC)
Set the wireless LAN connection with push button method.
1. Select the Button (PBC) in Wi-Fi Protected Setup menu and press
the button.
2. When the Scanning... shows on the screen, press the WPS button on
the access point of the wireless LAN.
3. When the connection to the access point is established, Successfully
configured shows on the screen.
Set the wireless LAN connection with push but-
ton method.
Set the wireless LAN connection with the PIN
code method.
4 Operation and Configuration
CL4NX Operator Manual
91