SATO CL4NX Operator's Manual page 139

Control Code
Applications > SDPL > Control Code
Set the control code.
The setting items are as follows:
1 Code Type
2 SOH
3 STX
4 CR
5 CNTBY
Code Type
Applications > SDPL > Control Code > Code Type
Set the type of the control code.
The options are as follows:
• Standard
• Alternate 1
• Alternate 2
• Custom
SOH
Applications > SDPL > Control Code > SOH
Set the SOH code.
You can change if you have selected Custom in Code Type menu.
The setting range is 00 to ff hex.
STX
Applications > SDPL > Control Code > STX
Set the STX code.
You can change if you have selected Custom in Code Type menu.
The setting range is 00 to ff hex.
Set the type of the control code.
Set the SOH code.
Set the STX code.
Set the CR code.
Set the CNTBY code.
4 Operation and Configuration
CL4NX Operator Manual
137