Lan Ethernet Interface - SATO CL4NX Operator's Manual

7 Appendix
7.9.2

LAN Ethernet Interface

Before you use this interface, you must install the driver of TCP/IP network protocol that supports the
10BASE-T/100BASE-TX LAN connection to the host computer.
Basic Specifications
Connector
Power Supply
Protocol
IP Address
Subnet Mask
Gateway Address
Cable Specifications
Cable
Cable Length
Software Specifications
Supported Protocol
Network Layer
Session Layer
Application Layer
230
CL4NX Operator Manual
RJ-45 Receptacle
Powered from the printer
Status3
Status4
Status5
IPv4
IPv6
IPv4
IPv6
IPv4
IPv6
10BASE-T/100BASE-TX Category 5
100 m (328 feet) or less
TCP/IP
IP, ICMP
TCP
LPD, FTP, DHCP, HTTP, SNMP, SNTP